Ender 3 Pro Component Box
par dheinle2010
Fichiers imprimables (7)
-
stlFront_Connector.stl
21 Ko · 2 048 téléchargements
-
stl
Component_Bottom.stl
108 Ko · 2 060 téléchargements
-
stl
PSU_Cover.stl
71 Ko · 2 053 téléchargements
-
stl
Rear_Connector_x2.stl
12 Ko · 2 030 téléchargements
-
stl
Component_Top.stl
322 Ko · 2 061 téléchargements
-
stl
Full_Model.stl
688 Ko · 2 062 téléchargements
-
stl
PSU_Box.stl
143 Ko · 2 066 téléchargements
Description
THESE FILES ARE UNPRINTED
I designed this box to the best of my ability thus far. I have not had the chance to try and print it as I don't have a print bed large enough to print them the way I would like to.
It is designed to work with the PSU from the Ender 3 Pro, and and SKR v1.3 mainboard. It is also designed to use M4x6 screws to hold the thing together.
Also, I was having issues with SketchUp (go figure), so the hole for the control nob is marked out with an indent, but will need to be drilled out by hand.
If you try to print this, please contact me and let me know how it works out!
Also, credit where credit is due, the 120mm hex fan vent is located here. (https://www.thingiverse.com/thing:1595208)