Temper - ESP8266 temperature sensor
par mcer12
Fichiers imprimables (4)
-
stltop_grid.stl
169 Ko · 3 550 téléchargements
-
stl
top_grid_with_breakout.stl
165 Ko · 3 525 téléchargements
-
stl
bottom.stl
48 Ko · 3 525 téléchargements
-
stl
magnetic_base.stl
104 Ko · 3 515 téléchargements
Description
This is a case for Temper - open source ESP8266 temperature sensor I made. Temper has a 13x7 pixel display, 30~40uA deep sleep consumption, TP4054 for charging and microUSB.
You can download all resources required to make your own Temper on it's Github page here:
https://github.com/mcer12/Temper-ESP8266
BOM + Pick&place + Gerber included.
Print without supports, 100% infill (enable supports if you want to print the version with cutout for the breakout header).
You can optionally print the base for attaching the sensor to the wall. You will need 4 or 6 (for stronger hold) magnets for that.