Parametric Sifting Tray with Replaceable Grate
par pruby
Fichiers imprimables (11)
-
stlbox.stl
6 Ko · 1 076 téléchargements
-
stl
grating_5mm.stl
115 Ko · 1 089 téléchargements
-
stl
grating_7mm.stl
91 Ko · 1 040 téléchargements
-
stl
grating_3mm.stl
191 Ko · 1 070 téléchargements
-
stl
grating_2mm.stl
248 Ko · 1 049 téléchargements
-
stl
grating_1mm.stl
421 Ko · 1 047 téléchargements
-
stl
grating_8mm.stl
83 Ko · 1 041 téléchargements
-
stl
grating_4mm.stl
138 Ko · 1 044 téléchargements
-
stl
grating_9mm.stl
73 Ko · 1 051 téléchargements
-
stl
grating_6mm.stl
103 Ko · 1 054 téléchargements
-
stl
grating_10mm.stl
65 Ko · 1 083 téléchargements
Description
This is a sifting tray with a replaceable bottom, inspired by Ivestfd's Garden Soil Sifter but re-designed from scratch. The changeable grate means that you can have one box (a ~4 hour print for me) and multiple grates for different applications (~1 hour each on my printer).
I've built something with a similar concept using OpenSCAD to produce a customisable model. The following major changes are introduced:
- Parametric sizing and spacing.
- Use of long "wires" supported in the sides and centre rather than a square grid - will sift narrow objects at their width, not length.
- The "wires" are partially rounded to guide objects through the gap.
Note that put together, this makes it a light duty sifter, not intended for heavy objects. I've uploaded STLs in the default 120x120mm format for each whole mm spacing from 1 to 10, with the thickness of the "wires" tuned to suit the spacing.
You can customise the grating using Customizer, for example to get a spacing for a particular application or narrow band, however if you need to change the size of the box, etc, I recommend downloading OpenSCAD and using that.