Educational Ear Structure Project
par Jidvei
Fichiers imprimables (25)
-
stlEardrum_writing_stencil.stl
102 Ko · 1 276 téléchargements
-
stl
Cochlea_writing_stencil.stl
2 Ko · 1 279 téléchargements
-
stl
Inner_ear_paint_stencil.stl
167 Ko · 1 272 téléchargements
-
stl
Ossicles_clip.stl
707 Ko · 1 301 téléchargements
-
stl
External_ear_writing_stencil.stl
238 Ko · 1 285 téléchargements
-
stl
Eardrum_paint_stencil.stl
173 Ko · 1 264 téléchargements
-
stl
Rear_beam.stl
14 Ko · 1 275 téléchargements
-
stl
Eardrum_membrane_ring.stl
1.6 Mo · 1 295 téléchargements
-
stl
Base_frame.stl
115 Ko · 1 270 téléchargements
-
stl
Cochlea.stl
2.4 Mo · 1 330 téléchargements
-
stl
Middle_ear_paint_stencil.stl
173 Ko · 1 266 téléchargements
-
stl
Left_frame.stl
20 Ko · 1 265 téléchargements
-
stl
Nerve_paint_stencil.stl
168 Ko · 1 266 téléchargements
-
stl
Ear_canal_paint_stencil.stl
242 Ko · 1 278 téléchargements
-
stl
Ossicles_writing_stencil.stl
155 Ko · 1 278 téléchargements
-
stl
Ear_canal.stl
3.1 Mo · 1 295 téléchargements
-
stl
Ear_canal_writing_stencil.stl
66 Ko · 1 269 téléchargements
-
stl
Right_frame.stl
20 Ko · 1 271 téléchargements
-
stl
Base.stl
475 Ko · 1 272 téléchargements
-
stl
Cochlea_support.stl
834 Ko · 1 278 téléchargements
-
stl
Base_writing_stecil.stl
133 Ko · 1 269 téléchargements
-
stl
Ossicles_support_beam.stl
244 Ko · 1 281 téléchargements
-
stl
Ossicles.stl
10.1 Mo · 1 322 téléchargements
-
stl
Auditory_nerve.stl
19.5 Mo · 1 295 téléchargements
-
stl
Ear.stl
10.6 Mo · 1 385 téléchargements
Description
I started creating this project to support my 7 year old daughter's science fair project and, because I noticed this kinds of models are even missing even too expensive to purchase, I decided to finish it and distribute them for free to everyone that wants to use it for educational purposes.
In creating this I used Neurothing's scanned ear components which I slightly improved for a better resolution.
All assembled parts are printed and trialed but I left part orientation as per CAD because this can constitute a STEM project from start to finish and I know there are schools that are using £D printers for educational purposes so I'm leaving the job of arranging the parts for printing to the final users.
Also, the project is coming with stencils to make painting easier. The writing related stencils are trialed, I did it myself with brushes and acrylics but it can be done much more easily using small painting sponges.
I also included stencils to enable spray painting of the base sections, these are not trialed but I believe they are working. The stencils are exposing for paining one area at a time and protects the other sections.
Some tolerances are tight, so be careful how much paint you are adding. Worst case, parts will fit by using a bit of force, which is fine.
The clip must be glued to the to of the ossicles and the whole assembly should be tied to the ossicles beam. If ossicles are too tight between eardrum and cochlea, you can scale down the part a bit.
The eardrum membrane is to be made out of plastic stretch wrapping foil, stretch it over the ear canal's end and fix it with the ring by pushing it hard to keeb the membrane in place.
Good luck!