28BYJ-48 Mounting Bracket

par jbeale

Fichiers imprimables (4)

  • stl

    Bracket_28BYJ-48_v2.stl

    317 Ko · 11 271 téléchargements

    Télécharger
  • stl

    Bracket_28BYJ-48_v1.stl

    303 Ko · 10 623 téléchargements

    Télécharger
  • stl

    Bracket_28BYJ-48_v3.stl

    362 Ko · 10 587 téléchargements

    Télécharger
  • stl

    Bracket_28BYJ-48_v4.stl

    376 Ko · 10 726 téléchargements

    Télécharger

Description

Right-angle mounting bracket for 28BYJ-48 (small 5V geared stepper) using M3 hardware. Version 1 has a smaller hole for the shaft, and is simpler to print, without countersunk holes for the M3 screws holding the motor. Version 2 has more shaft clearance for a particular timing belt pulley I'm using, and also makes the front surface flush. I think V2 is better, if your printer can manage the overhang caused by the countersunk holes for the M3 screws. Version 3 adds a side flange for more mounting options. V4 adds a front flange to resist down-tip when pulley belt exits below.
The SCAD files are provided so you can adjust to suit.

Tags

#28BYJ-48 #mounting bracket #stepper motor