Decision Spinner
par SadlerIn3D
Fichiers imprimables (10)
-
stlSpinner_Insert_-_You_Pick.stl
1.3 Mo · 213 téléchargements
-
stlSpinner_Insert_-_Go_Home.stl
1.4 Mo · 207 téléchargements
-
stlSpinner_Insert_-_No.stl
1.2 Mo · 215 téléchargements
-
stlSpinner_Insert_-_Spin_Again.stl
1.4 Mo · 211 téléchargements
-
stlSpinner_Insert_-_Ask_Emily.stl
1.3 Mo · 210 téléchargements
-
stlSpinner_Insert_-_Yea_Right.stl
1.4 Mo · 209 téléchargements
-
stlSpinner_Insert_-_Yes.stl
1.3 Mo · 214 téléchargements
-
stlSpinner_Insert_-_No_Way.stl
1.3 Mo · 210 téléchargements
-
stlPin_and_Arrow.stl
8.8 Mo · 252 téléchargements
-
stlSpinner_Top.stl
16.3 Mo · 253 téléchargements
Description
This is a fun decision making spinner that I made for work. It'll be place on top of my cubicle and will be held there with the magnets on the back.
All magnets used are neodymium.
Each triangular insert has a 3 mm by 1 mm magnet, which links up with the same sized magnet in the spinner housing.
There's a 3 mm by 1 mm magnet on the bottom center of the spinner housing and another one inside the spinning arrow. These two magnets are opposing polarities (north-seeking pole facing north-seeking pole, or south-seeking pole facing south-seeking pole) to create a somewhat levitating arrow. For this reason the arrow spins smooth and fast!
Finally, there are two 8 mm by 3 mm magnets on the bottom of the spinner housing to hold the assembly to my metal cubicle at work. Of course, none of the magnets are required for the spinner to function.