Educational Jet Engine Prototype
par brennanclark1213
Fichiers imprimables (43)
-
stl002_f_support_1.stl
2.2 Mo · 290 téléchargements
-
stl001_base_1.stl
1.6 Mo · 287 téléchargements
-
stl001_base_2.stl
1.6 Mo · 287 téléchargements
-
stl004_f_housing_1.stl
599 Ko · 285 téléchargements
-
stl003_r_support_1.stl
1.6 Mo · 284 téléchargements
-
stl009_m_housing_1.stl
407 Ko · 285 téléchargements
-
stl005_compressor_housing_1.stl
922 Ko · 287 téléchargements
-
stl011_f_shaft_1.stl
112 Ko · 284 téléchargements
-
stl013_connector_1.stl
82 Ko · 283 téléchargements
-
stl012_r_shaft_1.stl
72 Ko · 283 téléchargements
-
stl013_connector_2.stl
65 Ko · 284 téléchargements
-
stl007_t_housing_1.stl
918 Ko · 286 téléchargements
-
stl014_f_shaft_cover_1.stl
529 Ko · 283 téléchargements
-
stl015_r_shaft_extension_1.stl
388 Ko · 284 téléchargements
-
stl006_combustor_housing_1.stl
910 Ko · 283 téléchargements
-
stl019_lc_fan_2_1.stl
583 Ko · 284 téléchargements
-
stl022_lowc_stator_2_2.stl
391 Ko · 286 téléchargements
-
stl027_highc_stator_1_2.stl
376 Ko · 284 téléchargements
-
stl018_lc_fan_1_1.stl
613 Ko · 285 téléchargements
-
stl028_highc_stator_2_2.stl
363 Ko · 284 téléchargements
-
stl017_fan_1.stl
2.8 Mo · 296 téléchargements
-
stl021_lowc_stator_1_2.stl
412 Ko · 284 téléchargements
-
stl025_hc_fan_2_1.stl
555 Ko · 286 téléchargements
-
stl031_injector_2.stl
16 Ko · 283 téléchargements
-
stl030_combustor_1.stl
746 Ko · 285 téléchargements
-
stl017_fan_2.stl
2.6 Mo · 286 téléchargements
-
stl024_hc_fan_1_1.stl
570 Ko · 283 téléchargements
-
stl035_t_fan_4_1.stl
567 Ko · 283 téléchargements
-
stl036_t_stator_1_2.stl
348 Ko · 285 téléchargements
-
stl036_t_stator_1_3.stl
3 Ko · 284 téléchargements
-
stl034_t_fan_3_1.stl
552 Ko · 284 téléchargements
-
stl037_t_stator_2_3.stl
3 Ko · 283 téléchargements
-
stl038_t_stator_3_3.stl
3 Ko · 286 téléchargements
-
stl033_t_fan_2_1.stl
535 Ko · 286 téléchargements
-
stl039_t_stator_4_3.stl
3 Ko · 289 téléchargements
-
stl038_t_stator_3_2.stl
362 Ko · 285 téléchargements
-
stl037_t_stator_2_2.stl
347 Ko · 285 téléchargements
-
stl040_nozzle_1.stl
139 Ko · 283 téléchargements
-
stl039_t_stator_4_2.stl
366 Ko · 284 téléchargements
-
stl055_nozzle_2.stl
139 Ko · 284 téléchargements
-
stl042_mixer_1.stl
1.9 Mo · 286 téléchargements
-
stl032_t_fan_1_1.stl
521 Ko · 283 téléchargements
-
stl063_mixer_2.stl
1.9 Mo · 284 téléchargements
Description
Educational Jet Engine Prototype produced as part of my 3rd year University Project.
There is a variety of resources that have been produced as part of this project, with an aim to increase the accessibility of education in Jet Engines (Gas Turbine Engines).
All of which will be added to this page soon.
An assembly guide has been provided in the form of a PowerPoint.
Please refer to the BOM to check if you have the capability for printing some of the larger files.
These parts were printed mainly with a creator pro 2, as well as a FLSUN.
There are two versions either with or without a motor.
The details of the parts are required to purchase can be found in the BOM.
Initial design ideas were taken from Catiav5ftw:
https://www.thingiverse.com/thing:1327093
Operating Model:
https://youtu.be/QfqngTkKQww
Initial Run:
https://youtu.be/geDM-ofcbt8
(Please ignore the Fan alignment issue as the front bearing dried off-axis.)
Educational Animation:
https://youtu.be/4sZMAYpFGkc