Two casing Makerbase by WhDr
par WhDr
Fichiers imprimables (4)
-
stlChip_housing_cover_printing.stl
2.8 Mo · 675 téléchargements
-
stldisplay_housing.stl
18 Mo · 628 téléchargements
-
stlDisplay_case_cover.stl
11.7 Mo · 670 téléchargements
-
stlchip_housing.stl
27.3 Mo · 732 téléchargements
Description
Two casing Makerbase.
One for the Makerbase MKS DLC32 V2 chip.1
And one for the Makerbase MKS TS35-R V2 display.0
You can print without supports!
For the case of the Makerbase MKS DLC32 V2.1 chip, there are several lid options:
- Lid option for printing on a 3D printer: Chip housing cover (printing)
- Lid option for cutting on a laser machine: Chip housing cover (cut)
-=-=-=-=-=-
Fasteners that you will need:
For the casing of the chip:
screw M3x10 (4 pieces),
screw M3x16 (4 pieces),
screw M3x25 (4 pieces),
nut M3 (8 pieces).
For the display case:
screw M3x25 (4 pieces),
nut M3 (4 pieces).
-=-=-=-=-=-
Developed in the "Compass 3D" v15 program.
Printed on a 3D printer: Anycubic i3 Mega S.
My seal was successful.
I printed with plastic PLA.
Made in Siberia.
Thank you all, I'm going to feed the bear... :)