Mini-ITX PC case
par StePD
Fichiers imprimables (11)
-
stlMain.stl
172 Ko · 4 385 téléchargements
-
stlDown.stl
533 Ko · 4 100 téléchargements
-
stlUp_1.stl
364 Ko · 4 017 téléchargements
-
stlUp_2.stl
265 Ko · 4 014 téléchargements
-
stlBP.stl
268 Ko · 3 953 téléchargements
-
stlMB_middle.stl
168 Ko · 3 942 téléchargements
-
stlMB_left.stl
51 Ko · 3 928 téléchargements
-
stlMB_right.stl
49 Ko · 3 920 téléchargements
-
stlTPU.stl
33 Ko · 3 906 téléchargements
-
stlBackPlait_msi_b450igaming.stl
47 Ko · 3 928 téléchargements
-
stlBackPlait_Standart.stl
37 Ko · 3 965 téléchargements
Description
Hi! This is a mini-itx case that fits - a mini-itx motherboard with a flex atx power supply. Modeling this body, I was inspired by the design mac pro 2013
Printed Petg plastic. Then post-processing - grinding with sandpaper of different gradations: p80-p120-p220-p320. Then putty was needed in some problem areas. Then primer and paint. The result is a smooth surface, devoid of the disadvantages of 3D printing.
The lower fan must be put on the blower. Fan 140 mm, with mounts for 120 mm
To assemble the case you will need:
Countersunk screws m3 - L10x20pcs
Countersunk screws m4 - L30x4pcs