Threaded Insert Heat Press
par STUDIOPHOENIX
Fichiers imprimables (31)
-
stlBase_Extention_part_1_PLA.stl
287 Ko · 1 511 téléchargements
-
stlBase.stl
1.7 Mo · 1 497 téléchargements
-
stlIron_Holder.stl
2.3 Mo · 1 549 téléchargements
-
stl
Base_Extention_part_2_TPU.stl
245 Ko · 1 464 téléchargements
-
stlFront_Arm.stl
1.6 Mo · 1 521 téléchargements
-
stlCarriage_Stop_TPU.stl
129 Ko · 1 477 téléchargements
-
stlBase_Extention_Locater_TPU.stl
458 Ko · 1 471 téléchargements
-
stlWeight_print_with_99_infill.stl
666 Ko · 1 497 téléchargements
-
stl
Base_Extention_part_2_TPU_with_Phoenix.stl
1.2 Mo · 1 451 téléchargements
-
stlBase_Extention_part_3_PLA_Phoenix.stl
1.2 Mo · 1 464 téléchargements
-
stlFeet.stl
2.4 Mo · 1 504 téléchargements
-
stlFront_Carraige.stl
4 Mo · 1 517 téléchargements
-
stlTop_Assembly_all_parts.stl
13.4 Mo · 1 548 téléchargements
-
stlRear_Carraige.stl
4.1 Mo · 1 190 téléchargements
-
3mf
Base_Extension_Part_B_TPU.3mf
65 Ko · 1 096 téléchargements
-
3mf
Base_Cable_Tidy_TPU.3mf
505 Ko · 1 099 téléchargements
-
3mf
Arm.3mf
541 Ko · 1 093 téléchargements
-
3mf
Carriage_Stops_TPU.3mf
35 Ko · 1 088 téléchargements
-
3mf
Base_Extention_part_1_PLA.3mf
74 Ko · 1 088 téléchargements
-
3mf
Feet.3mf
811 Ko · 1 091 téléchargements
-
3mf
Front_Carriage.3mf
1.3 Mo · 1 092 téléchargements
-
3mf
Base_Extension_Top_Part_A_with_Phoenix.3mf
375 Ko · 1 086 téléchargements
-
3mf
Weight_99_Infill.3mf
204 Ko · 1 088 téléchargements
-
3mf
Iron_Holder.3mf
757 Ko · 1 092 téléchargements
-
3mf
Base.3mf
458 Ko · 1 093 téléchargements
-
3mf
Base_Extension_Top_Part_B_TPU_with_Phoenix.3mf
388 Ko · 1 086 téléchargements
-
3mf
Top_Assembly.3mf
4 Mo · 1 093 téléchargements
-
3mf
Base_Extension_Locators_TPU.3mf
125 Ko · 1 087 téléchargements
-
3mf
Rear_Carriage.3mf
1.3 Mo · 1 101 téléchargements
-
stlBase_Cable_Guide.stl
1.6 Mo · 1 161 téléchargements
-
step
Iron_Holder.step
327 Ko · 533 téléchargements
Description
ADDED .step file for Iron Holder for customisation.
ADDED 3MF FILES**
This design is a simplified version of the press I use on a daily basis and can be printed in regular PLA.
The top assembly is complicated but it’s worth the assembly effort.
When you release the soldering Iron it will rise on its own and come to a gentle stop.
The Base Extension is optional but is adjustable so adds more versatility.
All Parts are in correct orientation for printing.
The Base for the top assembly should be printed with support.
Print the Rear Carriage and Weight with 99% infill so they are as heavy as possible. Choosing 100% infill will significantly increase print time on slower machines as infill is printed faster than inner and outer walls.
EDIT:
I recommend printing with PLA+ as it’s stronger than regular PLA but still affordable.
The base is best printed with high infill as the weight will give the whole model more stability.
I print the base at 99 infill, however this uses approximately 400g of filament so it is your choice.
The belt clips are best printed on their sides with support to give the printed part more strength.
ADDITIONAL HARDWARE.
M3 countersunk screws 8-10mm
M4 Socket Cap screws 8-10mm
M4 Washers
M4 T-Nuts
3x Standard Bearings 8x22x7, also known as skateboard bearings.
Soldering Iron + optional heat set tips.
3D Printer Timing Belt. (Any generic will do, I have used one from an ender 3)
2040 aluminium profile 300mm
V Slot Wheels
Blue Threadlock (optional)
After assembly adjust screws in front and rear carriage wheels to dial in the rate of return.
Print the top part of the base extension as well as the extension locators and carriage stops in 95A TPU for best results.
The original “Deluxe” Version is now available on 3dCults.
It functions the same as this free version. The differences are aesthetic only.
It does however look great! Especially if you print the face plates with a textured PEI bed.
https://cults3d.com/en/3d-model/tool/threaded-insert-heat-press
Questions/Guidance feel free to drop me a message.
Happy Printing!
I’m Putting together a build tutorial on YouTube shortly.
Copy the link below to view a 3D Model of the original version to help with assembly.
https://collaborate.shapr3d.com/v/UkNmziB2Q-Z3G-jSszYVb
*note, above link will not work on many phones. PC or iPad should be fine.
Edit: 25th august 2023
- Files Now Have better orientation for slicing.
- As Requested, the Phoenix Logo cutout is now available as an option to print.
This is designed to sit underneath the TPU cover on the base extension which also has a cutout.
Edit: 1st September 2023
- Added Missing Rear Carriage
- Added 3mf Files
- Added Cable Guide for Base. (Print this in TPU 95a for best results)
Any Issues please message me, I’ll be happy to help.