Bambu Lab Side Spool Holder
par jan_martin
Fichiers imprimables (7)
-
stlBambu_Lab_Filament_Spool_Holder_v08-Inner_End_Cap.stl
32 Ko · 395 téléchargements
-
stlBambu_Lab_Filament_Spool_Holder_v09_Half_Bearing_Spacer_wide_for_2kg_spools.stl
49 Ko · 383 téléchargements
-
stl
Bambu_Lab_Filament_Spool_Holder_v08-Bearing_Spacer.stl
49 Ko · 394 téléchargements
-
stlBambu_Lab_Filament_Spool_Holder_v08-Outer_End_Cap.stl
44 Ko · 397 téléchargements
-
stl
Bambu_Lab_Filament_Spool_Holder_v09_Filament_Roll_wide_for_2kg_spools.stl
3.7 Mo · 382 téléchargements
-
stlBambu_Lab_Filament_Spool_Holder_v08-Filament_Roll.stl
3.5 Mo · 401 téléchargements
-
stl
Bambu_Lab_Filament_Spool_Holder_v09-Bracket.stl
2.2 Mo · 417 téléchargements
Description
Slightly overengineered slim, side mounted filament spool holder with simple bearings for P1P, P1S and X1C.
There are five 3D printed parts needed:
1x main bracket1x spool roll1x bearing spacer1x inner end cap1x outer end capUsed printing parameters
PLA0.6mm nozzle0.2mm layer height4 wall and top/bottom layers50% infillMost other needed parts are fairly standard
1x 185mm aluminium tube, 8x1mm length, i.e. 8mm OD, 6mm ID2x bearings type 608 8x22x7mm2x M3x20mm button head screws with washers1x 6mm plastic dowel1x 3,5x35mm self-tapping screwAdditional modifications
Replace the standard 550mm PTFE filament tube by one with 800m lengthAdd a second tube fitting to the outer end of the rubbery tube ductI'd be glad to receive some feedback or comments for further improvements.
The shown setup is currently undergoing testing on my Bambu Lab P1S.
Update:
Added STL files for holding 2kg spools with extra 50mm width.This is untested so far, please try at your own risk.Just print 1x wide roll and 2x wide bearing spacer and use a 235mm aluminium tube.Why this design?
I don't like the original Bambu Lab metal holder - so I didn't like the designs re-using it eitherI liked spool holders with bearings from my earlier printers as I found them to be more reliable, especially with slightly tangled filamentThe bearing-based designs I found for download are comparably bulky