heatset insert tool gridfinity bin

Created a gridfinity bin to store the heatset soldering iron tool I purchased from aliexpress
https://www.aliexpress.com/item/1005005823180927.html

The soldeing tip has an M4 screw base to insert the tips, so I put holes for M4 heatset inserts to be able to screw in the different tips and put in an M4 screw to attache the soldeing tip body.

I also made a "pusher" on which I attach the M8 tip to keep the inserts pushed down after applying heat (apply heat until the insert is 90% in, use the pusher to push it in until flush with surface and keep it there until the plastic cools a bit).

The labels are seperate, because I print my labels in batch (with a colour coded system for bin, label and text colour).

I included the fusion360 file if your parts are slightly different.

Note: I didn't align the screws, because doing so would have conflicted with the magnet holes or the thumbscrew.

This was remixed off the base from the gridfinity refined (https://www.printables.com/model/413761-gridfinity-refined) which itself is based of course on gridfinity created by Zack Freedman

Parts used:
tool itself: https://www.aliexpress.com/item/1005005823180927.html
heat set inserts: https://www.aliexpress.com/item/1005005345435440.html
screws and nuts: https://www.amazon.ca/Socket-Machine-Hardware-Assortment-12-9Class/dp/B071NP183X/