Fruit Tree (Modular)
par Davision3d
Fichiers imprimables (22)
-
stlRoot-Small-Wavy.STL
541 Ko · 7 251 téléchargements
-
stlRoot-Normal-Wavy.STL
541 Ko · 7 184 téléchargements
-
stlRoot-Small-Straight.STL
541 Ko · 7 144 téléchargements
-
stlBranch-Big.STL
1.2 Mo · 7 197 téléchargements
-
stlBranch-Normal.STL
1 Mo · 7 185 téléchargements
-
stlBranch-Small.STL
1.3 Mo · 7 182 téléchargements
-
stlBranch-Normal-long.STL
1.1 Mo · 7 152 téléchargements
-
stlRoot-Normal-Straight.STL
541 Ko · 7 099 téléchargements
-
stlRoot-Long.STL
541 Ko · 7 112 téléchargements
-
stlLeave.STL
541 Ko · 7 204 téléchargements
-
stlCrown-LeavesTop.STL
1.3 Mo · 7 174 téléchargements
-
stlBranch-VerySmall.STL
1.7 Mo · 7 114 téléchargements
-
stlTrunk-1xSlot_NT.STL
919 Ko · 7 228 téléchargements
-
stlTrunk-0xSlot_NT.STL
813 Ko · 7 041 téléchargements
-
stlTrunk-2xSlot_NT.STL
1 Mo · 7 085 téléchargements
-
stlTrunk-Crown_NT.STL
1.9 Mo · 7 129 téléchargements
-
stlTrunk-0xSlot-2xLength_NT.STL
1 Mo · 7 055 téléchargements
-
stlTrunk-0xSlot-3xLength_NT.STL
1.3 Mo · 7 046 téléchargements
-
stlTrunk-3xSlot_NT.STL
1.1 Mo · 7 434 téléchargements
-
stlTrunk-Base_NT.STL
1.6 Mo · 7 042 téléchargements
-
stlTrunk-Base-HiddenCase_NT.STL
1.1 Mo · 5 623 téléchargements
-
stlTrunk-Base-Alt-ClosedBottom_NT.STL
1.4 Mo · 7 078 téléchargements
Description
Grow a tree with your 3D printer!
Build your own custom fruit tree. Change it within seconds to have it fit to your latest fruits. Pieces snap together and the tree is stable. The fruits are hold in spirals that bend down and wrap around the fruit.
It is customize able with different branches, trunk pieces, leaves and roots. Start small and let it grow higher.
Check out how it works in this animation: https://www.youtube.com/watch?v=pByeTKZoU_U
No support required and it also prints with small 120x120mm printer. You could also go crazy with colors with just a single extruder printer.
You can of course also use it to hold other things then just fruits.
[Update: Very slighlty increased the trunk connections tolerance. Because I tested it with a very high infill and it turned out that disconnecting is too hard with it. The updated version works now also fine with very high infill. If you like the lower tolerance version, they are in the Trunk-Pieces_Lower-Tolerance.zip now.]