Extendable Socket Holder Chain
von thehans
Druckbare Dateien (9)
-
stlQuarter_Inch_Drive_Link.stl
1.5 Mo · 11 973 Downloads
-
stlQuarter_Inch_Drive_Plug.stl
1.3 Mo · 11 796 Downloads
-
stlQuarter_Inch_Drive_Ring.stl
68 Ko · 11 622 Downloads
-
stlThree_Eighths_Inch_Drive_Link.stl
995 Ko · 11 960 Downloads
-
stlThree_Eighths_Inch_Drive_Plug.stl
782 Ko · 11 783 Downloads
-
stlThree_Eighths_Inch_Drive_Ring.stl
81 Ko · 11 665 Downloads
-
stlHalf_Inch_Drive_Link.stl
1.6 Mo · 11 867 Downloads
-
stlHalf_Inch_Drive_Plug.stl
1.4 Mo · 11 723 Downloads
-
stlHalf_Inch_Drive_Ring.stl
94 Ko · 11 571 Downloads
Beschreibung
This is a socket holder in chain form!
Files provided for 1/4", 3/8" and 1/2" drive sockets.
To make an open ended socket holder:
Print as many "links" as you have sockets - 1.
Print 1 "ring" and one "plug"
To make a closed loop simply print a link for every socket.
Print and add more links at any time. Links are designed to snap together. If you have some difficulty snapping them in, try angling so that one side of the bumped edge is inside the groove, then squeeze the other side in. Needle nosed pliers can also help to squeeze the outer prongs.
Let me know how they work for you and post your makes! I haven't tried the 1/2" version yet.