Extendable Socket Holder Chain

door thehans

Printbare bestanden (9)

  • stl

    Quarter_Inch_Drive_Link.stl

    1.5 Mo · 11 980 downloads

    Downloaden
  • stl

    Quarter_Inch_Drive_Plug.stl

    1.3 Mo · 11 803 downloads

    Downloaden
  • stl

    Quarter_Inch_Drive_Ring.stl

    68 Ko · 11 629 downloads

    Downloaden
  • stl

    Three_Eighths_Inch_Drive_Link.stl

    995 Ko · 11 968 downloads

    Downloaden
  • stl

    Three_Eighths_Inch_Drive_Plug.stl

    782 Ko · 11 791 downloads

    Downloaden
  • stl

    Three_Eighths_Inch_Drive_Ring.stl

    81 Ko · 11 673 downloads

    Downloaden
  • stl

    Half_Inch_Drive_Link.stl

    1.6 Mo · 11 875 downloads

    Downloaden
  • stl

    Half_Inch_Drive_Plug.stl

    1.4 Mo · 11 731 downloads

    Downloaden
  • stl

    Half_Inch_Drive_Ring.stl

    94 Ko · 11 579 downloads

    Downloaden

Beschrijving

This is a socket holder in chain form!

Files provided for 1/4", 3/8" and 1/2" drive sockets.

To make an open ended socket holder:
Print as many "links" as you have sockets - 1.
Print 1 "ring" and one "plug"

To make a closed loop simply print a link for every socket.

Print and add more links at any time. Links are designed to snap together. If you have some difficulty snapping them in, try angling so that one side of the bumped edge is inside the groove, then squeeze the other side in. Needle nosed pliers can also help to squeeze the outer prongs.

Let me know how they work for you and post your makes! I haven't tried the 1/2" version yet.

Tags

#socket #socket wrench #tools holder