Subaru WRX EJ20 Boxer Engine Model - Fully Functioning
von ericthepoolboy
Druckbare Dateien (48)
-
stlCam_Spacer_5_scaled.stl
16 Ko · 98 146 Downloads
-
stloil_pan_-_electric_motor_-_no_electronics_Scaled.stl
531 Ko · 94 206 Downloads
-
stlExhuast_Valve_Lobe_scaled.stl
19 Ko · 108 722 Downloads
-
stlTensioner_scaled.stl
35 Ko · 108 477 Downloads
-
stlIntake_Valve_scaled.stl
128 Ko · 108 404 Downloads
-
stlSpring_retainer_scaled.stl
179 Ko · 108 446 Downloads
-
stlPiston_scaled.stl
197 Ko · 108 576 Downloads
-
stlFlywheel_scaled.stl
699 Ko · 108 366 Downloads
-
stlTensioner_plate_scaled.stl
66 Ko · 108 284 Downloads
-
stlExhuast_Valve_scaled.stl
113 Ko · 108 195 Downloads
-
stlOil_pan_drive_gear_scaled.stl
72 Ko · 108 124 Downloads
-
stlTiming_Pulley_scaled.stl
54 Ko · 108 047 Downloads
-
stlTensioner_pulley_scaled.stl
59 Ko · 107 991 Downloads
-
stlIntake_Manifold_scaled.stl
1.4 Mo · 108 656 Downloads
-
stlOil_Pump_scaled.stl
1015 Ko · 108 075 Downloads
-
stlIntake_manifold_spacer_scaled.stl
559 Ko · 107 984 Downloads
-
stlValve_spring_puck_scaled.stl
22 Ko · 107 844 Downloads
-
stlengine_block_2_scaled.stl
2.4 Mo · 109 205 Downloads
-
stlCam_nut_scaled.stl
25 Ko · 107 666 Downloads
-
stlConnecting_rod_bearing_cap_scaled.stl
55 Ko · 107 788 Downloads
-
stlCam_Spacer_3_scaled.stl
18 Ko · 107 584 Downloads
-
stlCrankshaft_Spacer_scaled.stl
18 Ko · 107 640 Downloads
-
stlCrankshaft_5_scaled.stl
103 Ko · 107 606 Downloads
-
stlCrankshaft_6_scaled.stl
97 Ko · 107 546 Downloads
-
stlConnecting_rod_scaled.stl
68 Ko · 107 630 Downloads
-
stlWater_Pump_scaled.stl
403 Ko · 107 453 Downloads
-
stlCrankshaft_7_scaled.stl
103 Ko · 107 470 Downloads
-
stlengine_block_1_scaled.stl
3.4 Mo · 108 583 Downloads
-
stlCam_Gear_3_scaled.stl
126 Ko · 107 101 Downloads
-
stlCam_Gear_1_scaled.stl
132 Ko · 107 099 Downloads
-
stlCam_Gear_2_scaled.stl
150 Ko · 106 958 Downloads
-
stlCam_Gear_4_scaled.stl
145 Ko · 106 923 Downloads
-
stlCam_bearing_cap_1_scaled.stl
415 Ko · 105 566 Downloads
-
stloil_pan_-_no_electronics_scaled.stl
492 Ko · 105 072 Downloads
-
stlCam_bearing_cap_2_scaled.stl
293 Ko · 105 026 Downloads
-
stlCrankshaft_rear_flange_scaled.stl
120 Ko · 101 645 Downloads
-
stloil_pan_-_electric_motor_-_no_electronics_-_for_use_with_motor_in_hardware_kit._scaled.stl
530 Ko · 99 307 Downloads
-
stlTensioner_pulley_-_2_-_780_belt_scaled.stl
65 Ko · 99 229 Downloads
-
stlTensioner_pulley_-_780_belt_scaled.stl
59 Ko · 99 148 Downloads
-
stlCrank_Gear_-_Wider_teeth_Scaled.stl
59 Ko · 98 370 Downloads
-
stlCam_Spacer_4_scaled.stl
16 Ko · 95 569 Downloads
-
stlCam_Spacer_scaled.stl
16 Ko · 95 552 Downloads
-
stlCam_Spacer_6_scaled.stl
18 Ko · 95 485 Downloads
-
stlCam_Spacer_2_scaled.stl
20 Ko · 92 816 Downloads
-
stlDriver_Side_Valve_Cover_-_Scaled.stl
1.2 Mo · 89 995 Downloads
-
stlPassenger_Side_Valve_Cover_-_Scaled.stl
1.2 Mo · 89 973 Downloads
-
stlEJ20_Head_-_Drivers_Side_-_Scaled.stl
4.6 Mo · 90 234 Downloads
-
stlEJ20_Head_-_Scaled.stl
4.6 Mo · 90 122 Downloads
Beschreibung
See updated cutaway version of the EJ20 can be found here.
https://www.thingiverse.com/thing:2451310
Complete hardware kits are made for the updated cutaway model.
https://www.makerrx.com/products/mrx2
Kits include all non printed parts, 500 rpm dc motor, speed controller, power connectors, and DC power supply.
Subaru EJ20 Boxer engine!!!
It's fully functional as in all parts move as intended in the real thing. Do not confuse it with a real engine, as this is not.
This engine is slightly harder to print and assemble than my Toyota 22RE engine. So it is best to print or familiarize yourself with my previous models if you choose to print this one. The scale is once again 35% of the original which seems to be a good size for printing and finding fasteners that work and look right. The tolerances are a little tighter and depending on your printer the crankshaft might take some tweaking to get it right so that there is not interference while rotating.
This model has smaller engine block than the Toyota 22RE which will allow smaller printers to print it.