Subaru WRX EJ20 Boxer Engine Model - Fully Functioning
door ericthepoolboy
Printbare bestanden (48)
-
stlCam_Spacer_5_scaled.stl
16 Ko · 98 208 downloads
-
stloil_pan_-_electric_motor_-_no_electronics_Scaled.stl
531 Ko · 94 267 downloads
-
stlExhuast_Valve_Lobe_scaled.stl
19 Ko · 108 786 downloads
-
stlTensioner_scaled.stl
35 Ko · 108 537 downloads
-
stlIntake_Valve_scaled.stl
128 Ko · 108 466 downloads
-
stlSpring_retainer_scaled.stl
179 Ko · 108 508 downloads
-
stlPiston_scaled.stl
197 Ko · 108 640 downloads
-
stlFlywheel_scaled.stl
699 Ko · 108 430 downloads
-
stlTensioner_plate_scaled.stl
66 Ko · 108 345 downloads
-
stlExhuast_Valve_scaled.stl
113 Ko · 108 256 downloads
-
stlOil_pan_drive_gear_scaled.stl
72 Ko · 108 187 downloads
-
stlTiming_Pulley_scaled.stl
54 Ko · 108 108 downloads
-
stlTensioner_pulley_scaled.stl
59 Ko · 108 054 downloads
-
stlIntake_Manifold_scaled.stl
1.4 Mo · 108 725 downloads
-
stlOil_Pump_scaled.stl
1015 Ko · 108 138 downloads
-
stlIntake_manifold_spacer_scaled.stl
559 Ko · 108 046 downloads
-
stlValve_spring_puck_scaled.stl
22 Ko · 107 905 downloads
-
stlengine_block_2_scaled.stl
2.4 Mo · 109 277 downloads
-
stlCam_nut_scaled.stl
25 Ko · 107 727 downloads
-
stlConnecting_rod_bearing_cap_scaled.stl
55 Ko · 107 851 downloads
-
stlCam_Spacer_3_scaled.stl
18 Ko · 107 647 downloads
-
stlCrankshaft_Spacer_scaled.stl
18 Ko · 107 706 downloads
-
stlCrankshaft_5_scaled.stl
103 Ko · 107 669 downloads
-
stlCrankshaft_6_scaled.stl
97 Ko · 107 611 downloads
-
stlConnecting_rod_scaled.stl
68 Ko · 107 695 downloads
-
stlWater_Pump_scaled.stl
403 Ko · 107 516 downloads
-
stlCrankshaft_7_scaled.stl
103 Ko · 107 534 downloads
-
stlengine_block_1_scaled.stl
3.4 Mo · 108 657 downloads
-
stlCam_Gear_3_scaled.stl
126 Ko · 107 165 downloads
-
stlCam_Gear_1_scaled.stl
132 Ko · 107 162 downloads
-
stlCam_Gear_2_scaled.stl
150 Ko · 107 020 downloads
-
stlCam_Gear_4_scaled.stl
145 Ko · 106 986 downloads
-
stlCam_bearing_cap_1_scaled.stl
415 Ko · 105 626 downloads
-
stloil_pan_-_no_electronics_scaled.stl
492 Ko · 105 133 downloads
-
stlCam_bearing_cap_2_scaled.stl
293 Ko · 105 086 downloads
-
stlCrankshaft_rear_flange_scaled.stl
120 Ko · 101 711 downloads
-
stloil_pan_-_electric_motor_-_no_electronics_-_for_use_with_motor_in_hardware_kit._scaled.stl
530 Ko · 99 368 downloads
-
stlTensioner_pulley_-_2_-_780_belt_scaled.stl
65 Ko · 99 291 downloads
-
stlTensioner_pulley_-_780_belt_scaled.stl
59 Ko · 99 209 downloads
-
stlCrank_Gear_-_Wider_teeth_Scaled.stl
59 Ko · 98 432 downloads
-
stlCam_Spacer_4_scaled.stl
16 Ko · 95 630 downloads
-
stlCam_Spacer_scaled.stl
16 Ko · 95 615 downloads
-
stlCam_Spacer_6_scaled.stl
18 Ko · 95 544 downloads
-
stlCam_Spacer_2_scaled.stl
20 Ko · 92 877 downloads
-
stlDriver_Side_Valve_Cover_-_Scaled.stl
1.2 Mo · 90 058 downloads
-
stlPassenger_Side_Valve_Cover_-_Scaled.stl
1.2 Mo · 90 037 downloads
-
stlEJ20_Head_-_Drivers_Side_-_Scaled.stl
4.6 Mo · 90 303 downloads
-
stlEJ20_Head_-_Scaled.stl
4.6 Mo · 90 186 downloads
Beschrijving
See updated cutaway version of the EJ20 can be found here.
https://www.thingiverse.com/thing:2451310
Complete hardware kits are made for the updated cutaway model.
https://www.makerrx.com/products/mrx2
Kits include all non printed parts, 500 rpm dc motor, speed controller, power connectors, and DC power supply.
Subaru EJ20 Boxer engine!!!
It's fully functional as in all parts move as intended in the real thing. Do not confuse it with a real engine, as this is not.
This engine is slightly harder to print and assemble than my Toyota 22RE engine. So it is best to print or familiarize yourself with my previous models if you choose to print this one. The scale is once again 35% of the original which seems to be a good size for printing and finding fasteners that work and look right. The tolerances are a little tighter and depending on your printer the crankshaft might take some tweaking to get it right so that there is not interference while rotating.
This model has smaller engine block than the Toyota 22RE which will allow smaller printers to print it.