Raspberry pi zero case
von I_am_me
Druckbare Dateien (8)
-
stlTop_rpi0_v1.2.stl
251 Ko · 13 042 Downloads
-
stlBottom_rpi0_v1.2.stl
136 Ko · 12 974 Downloads
-
stlBottom_rpi0_v1.3.stl
137 Ko · 13 283 Downloads
-
stlTop_rpi0_v1.3.stl
252 Ko · 13 206 Downloads
-
stl0.4_top_rpi0_v1.3.stl
245 Ko · 13 135 Downloads
-
stl0.4_bottom_rpi0_v1.3.stl
141 Ko · 13 114 Downloads
-
stl0.4_bottom_rpi0_v1.2.stl
141 Ko · 12 807 Downloads
-
stl0.4_top_rpi0_v1.2.stl
244 Ko · 12 813 Downloads
Beschreibung
This is a simple case for the Raspberry Pi Zero. This two piece design features standoffs so you can solder on whatever you want, access to all GPIOs and cutouts for all ports of the pi (micro USB, mini HDMI and micro SD).
There are two versions :
- The v1.2, for the raspberry pi zero without the camera port.
- The v1.3, for the raspberry pi zero with the camera port.
The 0.4 versions have a 0.4mm tolerance, others have a 0.8mm tolerance to accommodate printers that have a harder time printing the 0.4mm parts.
If you have ideas for improvements feel free to leave a comment.