Raspberry pi zero case
par I_am_me
Fichiers imprimables (8)
-
stlTop_rpi0_v1.2.stl
251 Ko · 13 042 téléchargements
-
stlBottom_rpi0_v1.2.stl
136 Ko · 12 974 téléchargements
-
stlBottom_rpi0_v1.3.stl
137 Ko · 13 283 téléchargements
-
stlTop_rpi0_v1.3.stl
252 Ko · 13 206 téléchargements
-
stl0.4_top_rpi0_v1.3.stl
245 Ko · 13 135 téléchargements
-
stl0.4_bottom_rpi0_v1.3.stl
141 Ko · 13 114 téléchargements
-
stl0.4_bottom_rpi0_v1.2.stl
141 Ko · 12 807 téléchargements
-
stl0.4_top_rpi0_v1.2.stl
244 Ko · 12 813 téléchargements
Description
This is a simple case for the Raspberry Pi Zero. This two piece design features standoffs so you can solder on whatever you want, access to all GPIOs and cutouts for all ports of the pi (micro USB, mini HDMI and micro SD).
There are two versions :
- The v1.2, for the raspberry pi zero without the camera port.
- The v1.3, for the raspberry pi zero with the camera port.
The 0.4 versions have a 0.4mm tolerance, others have a 0.8mm tolerance to accommodate printers that have a harder time printing the 0.4mm parts.
If you have ideas for improvements feel free to leave a comment.