2D Plotter Adapter (multicolor!)
von Zarbuta
Druckbare Dateien (8)
-
stl2D_Plotter_for_Prusa_Printers_MK2.5_MK3.stl
204 Ko · 1 699 Downloads
-
stl2D_Plotter_-_Pen_Carriage.stl
315 Ko · 1 692 Downloads
-
step2D_Plotter_-_Anchor_Template.step
58 Ko · 1 672 Downloads
-
stl2D_Plotter_-_Pen_Adjuster.stl
288 Ko · 1 638 Downloads
-
stl2D_Plotter_-_Pen_Cradle_8.5mm_hexagon.stl
72 Ko · 1 636 Downloads
-
stl2D_Plotter_-_Pen_Cradle_Sharpie_11.2_to_12.2mm_circle.stl
183 Ko · 1 627 Downloads
-
step
2D_Plotter_for_Prusa_Printers_MK2.5_MK3.step
166 Ko · 1 655 Downloads
-
stl2D_Plotter_-_Pen_Adjuster_Filler.stl
50 Ko · 1 626 Downloads
Beschreibung
Multicolors 2D Plotter
In action: https://youtu.be/gprN2s9aOII (drawing this item https://www.thingiverse.com/thing:3173808 on a paper)
Features:
- Easy to calibrate pen alignment and depth.
- Multicolors.
- Uses magnets (8x2mm) instead of an elastic to push the pen onto the bed.
- Uses M4 screws and hexagon nuts.
- Should be relatively easy to use the same 'magnetized pen carriage' design for other printers (see 2DPlotter-_Anchor_Template.step file that could be included in other design).
I included profiles for "Slic3r Prusa Edition" (that can be imported with "FileLoad Config Bundle"):
- A new printer: "2D Plotter with Pens" that support multiple extruders. If needed, the number of colors can be increased by changing the value of "GeneralCapabilitiesExtruders". Object needs to be 0.10mm tall (i.e. Max Print Height = 0.11mm).
- 2 new "print settings": "0.2mm Pen Tip" and "1.0mm Pen Tip". It's usually better to use 0.2mm.
- 2 new "filaments": "Pen" and "Pen with Calibration".
Tested with Prusa MK2.5, MK3, and MK3S.