2D Plotter Adapter (multicolor!)

door Zarbuta

Printbare bestanden (8)

  • stl

    2D_Plotter_for_Prusa_Printers_MK2.5_MK3.stl

    204 Ko · 1 699 downloads

    Downloaden
  • stl

    2D_Plotter_-_Pen_Carriage.stl

    315 Ko · 1 692 downloads

    Downloaden
  • step

    2D_Plotter_-_Anchor_Template.step

    58 Ko · 1 672 downloads

    Downloaden
  • stl

    2D_Plotter_-_Pen_Adjuster.stl

    288 Ko · 1 638 downloads

    Downloaden
  • stl

    2D_Plotter_-_Pen_Cradle_8.5mm_hexagon.stl

    72 Ko · 1 636 downloads

    Downloaden
  • stl

    2D_Plotter_-_Pen_Cradle_Sharpie_11.2_to_12.2mm_circle.stl

    183 Ko · 1 627 downloads

    Downloaden
  • step

    2D_Plotter_for_Prusa_Printers_MK2.5_MK3.step

    166 Ko · 1 655 downloads

    Downloaden
  • stl

    2D_Plotter_-_Pen_Adjuster_Filler.stl

    50 Ko · 1 626 downloads

    Downloaden

Beschrijving

Multicolors 2D Plotter

In action: https://youtu.be/gprN2s9aOII (drawing this item https://www.thingiverse.com/thing:3173808 on a paper)

Features:

  • Easy to calibrate pen alignment and depth.
  • Multicolors.
  • Uses magnets (8x2mm) instead of an elastic to push the pen onto the bed.
  • Uses M4 screws and hexagon nuts.
  • Should be relatively easy to use the same 'magnetized pen carriage' design for other printers (see 2DPlotter-_Anchor_Template.step file that could be included in other design).

I included profiles for "Slic3r Prusa Edition" (that can be imported with "FileLoad Config Bundle"):

  • A new printer: "2D Plotter with Pens" that support multiple extruders. If needed, the number of colors can be increased by changing the value of "GeneralCapabilitiesExtruders". Object needs to be 0.10mm tall (i.e. Max Print Height = 0.11mm).
  • 2 new "print settings": "0.2mm Pen Tip" and "1.0mm Pen Tip". It's usually better to use 0.2mm.
  • 2 new "filaments": "Pen" and "Pen with Calibration".

Tested with Prusa MK2.5, MK3, and MK3S.

Tags

#fusion 360 #Plotter #prusa