Equal Space Divider
von greatkaa
Druckbare Dateien (8)
-
stlEqual_Space_Divider_-_1_layer_pin.F.stl
24 Ko · 1 214 Downloads
-
stlEqual_Space_Divider_-_Center.stl
34 Ko · 1 206 Downloads
-
stlEqual_Space_Divider_-_Long_sides.F.stl
95 Ko · 1 202 Downloads
-
stlEqual_Space_Divider_-_3_layer_pin.M.stl
42 Ko · 1 201 Downloads
-
stlEqual_Space_Divider_-_3_layer_pin.F.stl
41 Ko · 1 201 Downloads
-
stlEqual_Space_Divider_-_Short_sides.F.stl
63 Ko · 1 201 Downloads
-
stlEqual_Space_Divider_-_Short_sides.M.stl
38 Ko · 1 170 Downloads
-
stlEqual_Space_Divider_-_Long_sidesM.stl
43 Ko · 1 174 Downloads
Beschreibung
This is the remix.
It can measure equal spaces of approximately 2cm (original 4cm) to 11cm. Simply print as many as you need (see formula below) to make it as long as you want.
To make a 5 measuring points tool, print the following:
4 x Equal_SpaceDivider-_Long_sides.(F).stl
4 x Equal_SpaceDivider-_Long_sides(M).stl
2 x Equal_SpaceDivider-_Short_sides.(F).stl
2 x Equal_SpaceDivider-_Short_sides.(M).stl
5 x Equal_SpaceDivider-_Center.stl
6 x Equal_SpaceDivider-_1_layer_pin.(F).stl
10 x Equal_SpaceDivider-_3_layer_pin.(F).stl
10 x Equal_SpaceDivider-_3_layer_pin.(M).stl
So, to make any length tool, use this formula.
To make a N measuring points tool, print the following:
[N-1] x Equal_SpaceDivider-_Long_sides.(F).stl
[N-1] x Equal_SpaceDivider-_Long_sides(M).stl
2 x Equal_SpaceDivider-_Short_sides.(F).stl
2 x Equal_SpaceDivider-_Short_sides.(M).stl
[N] x Equal_SpaceDivider-_Center.stl
[N + 1] x Equal_SpaceDivider-_1_layer_pin.(F).stl
[N2] x Equal_SpaceDivider-_3_layer_pin.(F).stl
[N2] x Equal_SpaceDivider-_3_layer_pin.(M).stl
I've printed this with PLA and added a brim to secure the parts to the print bed. The pins above are not 100% secure, so maybe drop a little glue into it to make it stick.
I hope someone finds this useful.
Check out this awesome video by tyler785 who printed this gadget: https://www.youtube.com/watch?v=amx78LxP-L0&feature=youtu.be