Mini-ITX/Mini-DTX Case Full size GPU
von koriwi
Druckbare Dateien (26)
-
stlcase_1.stl
2.3 Mo · 3 454 Downloads
-
stlcase_2.stl
2.1 Mo · 11 830 Downloads
-
stl
low_air_flow_panel_1.stl
1.6 Mo · 11 665 Downloads
-
stl
low_air_flow_panel_2.stl
1.6 Mo · 11 650 Downloads
-
stl
high_air_flow_panel_1.stl
266 Ko · 11 669 Downloads
-
stl
high_air_flow_panel_2.stl
262 Ko · 11 652 Downloads
-
stl
bottom-grill_1.stl
1.8 Mo · 11 670 Downloads
-
stl
bottom-grill_2.stl
1.7 Mo · 11 654 Downloads
-
stl
sfx.stl
364 Ko · 11 684 Downloads
-
stl
low_air_flow_panel_3_i3_compatible.stl
19 Ko · 4 020 Downloads
-
stl
high_air_flow_panel_3_i3_compatible.stl
58 Ko · 4 015 Downloads
-
stl
high_air_flow_panel_4_i3_compatible.stl
51 Ko · 4 002 Downloads
-
stlcase_1_i3_compatible.stl
2.2 Mo · 3 314 Downloads
-
stl
case_2_i3_compatible.stl
2 Mo · 4 037 Downloads
-
stlcase_3_i3_compatible.stl
176 Ko · 3 303 Downloads
-
stl
case_4_i3_compatible.stl
66 Ko · 4 016 Downloads
-
stl
case_5_i3_compatible.stl
514 Ko · 4 018 Downloads
-
stl
high_air_flow_panel_1_i3_compatible.stl
230 Ko · 4 008 Downloads
-
stl
high_air_flow_panel_2_i3_compatible.stl
227 Ko · 4 001 Downloads
-
stl
low_air_flow_panel_4_i3_compatible.stl
19 Ko · 3 997 Downloads
-
stl
low_air_flow_panel_2_i3_compatible.stl
1.6 Mo · 3 994 Downloads
-
stl
low_air_flow_panel_1_i3_compatible.stl
1.6 Mo · 4 001 Downloads
-
stlhigh_air_flow_panel_one_piece.stl
365 Ko · 3 317 Downloads
-
stllow_air_flow_panel_one_piece.stl
3 Mo · 3 312 Downloads
-
stlbottom-grill_one_piece.stl
3.4 Mo · 3 330 Downloads
-
stlcase_one_piece.stl
4 Mo · 3 594 Downloads
Beschreibung
No Special settings needed. I printed mine with 0.3mm default setup.
Now compatible with i3 sized printers (<=217mm)
Things you need for this case.
- Some computer screws
- A Button (for starting)
- Riser cable (PH-CBRS_SL30, PH-CBRS-FL30 should work, too) for the GPU
My Components:
- GTX 1070 STRIX (30cm length) (69°C while playing)
- 6700k i7 delidded with Big Shuriken 2 rev. b (43°C while playing)
- beQuiet 400W SFX psu (maybe sfx-l will fit if you have a modular one and an angled rubber plug)
I holded this case back for half a year, because it was my first big project and I'm not sure about the quality of my work yet. Just let me know what you think please :)
Why i did this:
- I wanted a mini-itx case
- I have an uncommon mini-DTX board
- I liked louqe ghost s1 and dancase a4 but my board won't fit and they are too expensive anyway
- I like 3D printing/designing :)
I cut the sidepanels from selfmade carbon fibre plates instead of printing them. But you can just print them.
Some photos are from older prototypes and dont show the newest version!
How to Assemble:
- Glue the parts together with your favorite glue.
- moun the psu bracket with vhb/double sided tape so you can adjust where it should go
Whats new?
- New, more beautiful/closer to louqe ghost/dan case a4, lower aiflow panel
- old high airflow panel split in half for you ready to print
- extended all surfaces on sides that need to be glued