Combination lock safe

von rndmframes_printing

Druckbare Dateien (17)

Beschreibung

SAFE MECHANISM
WITH COMBINATION LOCK

I designed this combination lock in a safe like enclosure.

DOWNLOAD INFORMATION -404-

Please go to Thing Files and download each part separately!
It seems like there is a problem with the download of my recent designs. It has to be a thingiverse problem since other experienced that as well. Hope this gets fixed soon, meanwhile use the little workaround that I mentioned before.

Partlist

  • 1x - safe_case
  • 1x - safe_sled
  • 2x - safe_sledRod
  • 1x - safe_shaftHolder
  • 1x - safe_shaftHolderBrim
  • 1x - safe_shaft
  • 3x - safe_spacer
  • 2x - safe_disk2and3
  • 1x - safe_disk1
  • 2x - safe_pin1and3
  • 1x - safe_pin2
  • 2x - safe_lever
  • 2x - safe_leverShaftShort
  • 1x - safe_leverShaftLong
  • 1x - safe_leverHandle
  • 1x - safe_dial
  • 1x - safe_indicator

Assembly information

For the assembly it is best to build the lever first. Connect the two levers with their short arms and the "safe_leverShaftShort" to the "safe_sled" than put the second "safe_leverShaftShort" through the long arms of the levers. Put the assembly in the "safe_case" and push the "safe_leverShaftLong" with the "safe_leverHandle" on it through the case and the middle hole of the two levers. Push the two "safe_sledRod" through the sled and the holes of the case, they are the locking bolts of the safe. The "safe_disk1" goes with one "safe_spacer" through the case and gehts connected to the "safe_dial". The three pins are inserted in different positions (this creates the combination). "safe_disk2and3" together with the two spacers are going on the "safe_shaft" wich is going to be mounted to the "safe_shaftHolder" with the "safe_shaftHolderBrim". Last step is to insert the shaft holder with the shaft into the slot an the bottom of the case and glue the "safe_indicator" next to the dial in place.

I also uploaded a pdf with some pictures of the assembly which can be found in the Thing Files.

The tolerances used are tight so drilling and sanding may be required in some places.

Tags

#Combination #Combination Lock #mechanism #safe