Zipper Pull using paperclip
by ScubaScott
Printable files (10)
-
stlZipperPull_-_Cover.stl
186 Ko · 16 614 downloads
-
stl
ZipperPull_-_clip.stl
278 Ko · 16 546 downloads
-
stlZipperPull_-_Cover.stl
243 Ko · 16 607 downloads
-
stlZipperPull_-_clip.stl
278 Ko · 16 597 downloads
-
stlSmall_Zipperpull_-_clip.stl
197 Ko · 16 134 downloads
-
stlSmall_Zipperpull_-_Cover.stl
155 Ko · 16 040 downloads
-
stlTiny_Zipperpull_-_Cover.stl
131 Ko · 15 975 downloads
-
stlTiny_Zipperpull_-_clip.stl
169 Ko · 16 027 downloads
-
stlSmall_ZipperPull-Glued_-_clip.stl
236 Ko · 12 930 downloads
-
stlSmall_ZipperPull-Glued_-_Cover.stl
194 Ko · 12 943 downloads
Description
Zipper pull replacement using a paperclip for a strong connection to the zipper.
There are several posts inside and should fit a variety of paper clips, some bending may be required.
I used 3 M2x6 screws to hold it together.
update 11/2/17
Added a second smaller pull should work with a #1 paperclip
and a third Tiny pull, again should work with the same #1 paperclip
Update 11/25/18
Merry Christmas, I've added a glueable model, that I think works even better.
Just add a couple drops of CA glue and push it together. (once it's all attached to the garment) Enjoy!
Here's a link to the On-Shape drawing if you care to re-mix it.