Zipper Pull using paperclip
por ScubaScott
Archivos imprimibles (10)
-
stlZipperPull_-_Cover.stl
186 Ko · 16 618 descargas
-
stl
ZipperPull_-_clip.stl
278 Ko · 16 549 descargas
-
stlZipperPull_-_Cover.stl
243 Ko · 16 610 descargas
-
stlZipperPull_-_clip.stl
278 Ko · 16 599 descargas
-
stlSmall_Zipperpull_-_clip.stl
197 Ko · 16 136 descargas
-
stlSmall_Zipperpull_-_Cover.stl
155 Ko · 16 042 descargas
-
stlTiny_Zipperpull_-_Cover.stl
131 Ko · 15 978 descargas
-
stlTiny_Zipperpull_-_clip.stl
169 Ko · 16 029 descargas
-
stlSmall_ZipperPull-Glued_-_clip.stl
236 Ko · 12 932 descargas
-
stlSmall_ZipperPull-Glued_-_Cover.stl
194 Ko · 12 945 descargas
Descripción
Zipper pull replacement using a paperclip for a strong connection to the zipper.
There are several posts inside and should fit a variety of paper clips, some bending may be required.
I used 3 M2x6 screws to hold it together.
update 11/2/17
Added a second smaller pull should work with a #1 paperclip
and a third Tiny pull, again should work with the same #1 paperclip
Update 11/25/18
Merry Christmas, I've added a glueable model, that I think works even better.
Just add a couple drops of CA glue and push it together. (once it's all attached to the garment) Enjoy!
Here's a link to the On-Shape drawing if you care to re-mix it.