Gloomhaven Insert
by pdoronila
Printable files (27)
-
stlGH_Insert_Tray_1.stl
14 Ko · 56 299 downloads
-
stlGH_Insert_Tray_1_L.stl
6 Ko · 55 788 downloads
-
stlGH_Insert_Tray_1_R.stl
8 Ko · 55 616 downloads
-
stlGH_Insert_Tray_1_LR.stl
5 Ko · 55 358 downloads
-
stlGH_Insert_Tray_1_LL.stl
4 Ko · 55 236 downloads
-
stlGH_Insert_Tray_1_UL.stl
5 Ko · 55 199 downloads
-
stlGH_Insert_Tray_1_UR.stl
7 Ko · 55 177 downloads
-
stlGH_Insert_Tray_2.stl
34 Ko · 55 645 downloads
-
stlGH_Insert_Tray_2_L.stl
15 Ko · 55 517 downloads
-
stlGH_Insert_Tray_2_R.stl
19 Ko · 55 346 downloads
-
stlGH_Insert_Tray_2_UR.stl
8 Ko · 55 261 downloads
-
stlGH_Insert_Tray_2_UL.stl
11 Ko · 55 186 downloads
-
stlGH_Insert_Tray_2_LR.stl
11 Ko · 55 135 downloads
-
stlGH_Insert_Tray_2_LL.stl
11 Ko · 55 118 downloads
-
stlGH_Insert_Tray_3.stl
28 Ko · 55 296 downloads
-
stlGH_Insert_Tray_3_L.stl
15 Ko · 55 155 downloads
-
stlGH_Insert_Tray_3_R.stl
13 Ko · 55 082 downloads
-
stlGH_Insert_Tray_3_LR.stl
11 Ko · 55 050 downloads
-
stlGH_Insert_Tray_3_LL.stl
9 Ko · 54 951 downloads
-
stlGH_Insert_Tray_3_UR.stl
8 Ko · 54 939 downloads
-
stlGH_Insert_Tray_3_UL.stl
9 Ko · 54 906 downloads
-
stlGH_Insert_Tray_4.stl
24 Ko · 55 252 downloads
-
stlGH_Insert_Tray_4_L.stl
14 Ko · 55 180 downloads
-
stlGH_Insert_Tray_4_R.stl
10 Ko · 55 134 downloads
-
stlGH_Insert_Tray_5.stl
26 Ko · 55 133 downloads
-
stlGH_Insert_Tray_5_L.stl
10 Ko · 54 970 downloads
-
stlGH_Insert_Tray_5_R.stl
16 Ko · 54 920 downloads
Description
Update 1/19/18: I am slowly adding each tray cut into 4 pieces (UL, LL, UR, LR). Only Tray 1, 2, 3 needed to be cut into four's for smaller printers.
Update 1/18/18: To eliminate any confusion, I am removing the layer files. I would recommend printing the Tray Insert_Tray files if you have a big enough bed or the L&R versions which fit the Prusa bed or any bed within that size.
Updated 1/13/18: Added the missing ledges on the character tray (Tray 5) that keeps the action cards elevated from the items and modifier deck.
Update 1/12/18: I uploaded Tray 1 L & R again because they didn't seem to process correctly. I have Tray 3 (PLA) and 4 (PETG) printed and pictures uploaded. I am just testing which filament works better for Trays as well as tolerances between filaments.
Update 1/4/18: Test print went well. I posted a picture of tray 2 in beige/purple. It is a tight fit, so make sure your printer is calibrated. I would recommend a top layer of 6 with 15% infill to get a clean top surface.
Update 1/2/18: Rebuilt the rest of the inserts and split them. They should print fine now.
Update 1/1/18: Tray 2 Rebuilt and Split.
Update 1/1/18: I was hoping these didn't needed to be redone for printing but @steellynx was right, I will have to redo these because its not printing correctly.
The initial files are converted from Skjalm (@steellynx) svg files he posted on facebook. The original design came from Martijn on facebook.
Most of the pieces will not fit most printers, so I will work on getting them cut up to fit at least for a Prusa