Gloomhaven Insert

Update 1/19/18: I am slowly adding each tray cut into 4 pieces (UL, LL, UR, LR). Only Tray 1, 2, 3 needed to be cut into four's for smaller printers.

Update 1/18/18: To eliminate any confusion, I am removing the layer files. I would recommend printing the Tray Insert_Tray files if you have a big enough bed or the L&R versions which fit the Prusa bed or any bed within that size.

Updated 1/13/18: Added the missing ledges on the character tray (Tray 5) that keeps the action cards elevated from the items and modifier deck.

Update 1/12/18: I uploaded Tray 1 L & R again because they didn't seem to process correctly. I have Tray 3 (PLA) and 4 (PETG) printed and pictures uploaded. I am just testing which filament works better for Trays as well as tolerances between filaments.

Update 1/4/18: Test print went well. I posted a picture of tray 2 in beige/purple. It is a tight fit, so make sure your printer is calibrated. I would recommend a top layer of 6 with 15% infill to get a clean top surface.

Update 1/2/18: Rebuilt the rest of the inserts and split them. They should print fine now.

Update 1/1/18: Tray 2 Rebuilt and Split.

Update 1/1/18: I was hoping these didn't needed to be redone for printing but @steellynx was right, I will have to redo these because its not printing correctly.

The initial files are converted from Skjalm (@steellynx) svg files he posted on facebook. The original design came from Martijn on facebook.

Most of the pieces will not fit most printers, so I will work on getting them cut up to fit at least for a Prusa