Piper 1 version 2 3D Printer
by Piper3D
Printable files (34)
-
stl2xcorner.v2.stl
146 Ko · 8 857 downloads
-
stljoint_bracket.v2.stl
122 Ko · 8 859 downloads
-
stl3xcorner_Right.v2.stl
302 Ko · 8 825 downloads
-
stl3xcorner_Left.v2.stl
302 Ko · 8 810 downloads
-
stlZ_support.v2.stl
280 Ko · 8 819 downloads
-
stlZ_Motor_Mount.v2.stl
115 Ko · 8 806 downloads
-
stlZ2xcorner_Left.v2.1.stl
158 Ko · 8 761 downloads
-
stlZ2xcorner_Right.v2.1.stl
158 Ko · 8 751 downloads
-
stlZbasemount_Left.v2.1.stl
333 Ko · 8 761 downloads
-
stlZbasemount_Right.v2.1.stl
333 Ko · 8 758 downloads
-
stlYMount.stl
403 Ko · 8 813 downloads
-
stlZ_Coupling_5-16.stl
548 Ko · 8 777 downloads
-
stlZ_Coupling_3-8.stl
553 Ko · 8 761 downloads
-
stlY_Belt_Holder.stl
643 Ko · 8 876 downloads
-
stlXwireholder.stl
97 Ko · 8 765 downloads
-
stlwire_holder_base.stl
96 Ko · 8 765 downloads
-
stlX_Motor_Mount.stl
321 Ko · 8 792 downloads
-
stlZbolt_fix_5-16.stl
631 Ko · 8 762 downloads
-
stlExtruder_wire_mount.stl
116 Ko · 8 744 downloads
-
stlxBeltHolder.stl
56 Ko · 8 749 downloads
-
stlZ-Roller_bracket.stl
186 Ko · 8 775 downloads
-
stlRoller_Sing.stl
1.9 Mo · 8 771 downloads
-
stlwire_holder.stl
137 Ko · 8 734 downloads
-
stlybedbeltholder.stl
159 Ko · 8 740 downloads
-
stlX_Belt_holder.stl
289 Ko · 8 750 downloads
-
stlExtruder_Mount.stl
227 Ko · 8 742 downloads
-
stlY_Motor_Mount.stl
82 Ko · 8 734 downloads
-
stlZbolt_fix_3-8.stl
594 Ko · 8 719 downloads
-
stlRoller_Double.stl
2.1 Mo · 8 769 downloads
-
stlextruder_mount_fan_low.stl
2.4 Mo · 8 697 downloads
-
stlextruder_mount_fan_volcano.stl
2.7 Mo · 8 752 downloads
-
stlXRoller_alternative_US.stl
516 Ko · 8 585 downloads
-
stlZ_Roller_Left.v2.1.stl
1.5 Mo · 8 514 downloads
-
stlZ_Roller_Right.v2.1.stl
1.5 Mo · 8 505 downloads
Description
[Update 02/20/2022] If you have difficulty downloading, files are also available at https://github.com/piper3d?tab=repositories
[Update: 1.3 upgrade was released https://www.thingiverse.com/thing:3539464]
[Update: Released design files. Look for Piper 1 v 2 US.zip]
[Update: added holes for tensioning screws to Z rollers - Z Roller Left.v2.1.stl and Z Roller Right.v2.1.stl ]
[Update if you use 0.4 mm nozzle to print Z Rollers please use 3/8s washers for the middle bolt]
[Update added alternative version of X Rollers "XRoller alternative US.stl" This is mainly targeted at large bed printers to increase stability along Y axis]
[Update: Z2xCorner and Zbasemount were updated to version 2.1]
[Update: ZRollers were updated please download and reprint them]
[Update Just found an error in Z2Xcorner stl files uploaded a newer version, if you already printed them and the joint bracket is not fitting you will need to file out from the bottom about 0.6mm]
UK version of the printer is at https://www.thingiverse.com/thing:2999885
My Interview to Matt Snow at ERRF 2018 https://youtu.be/ybxNmI4ZSYw.
Piper 1 3D printer is highly scalable, self-replicating 3D printer.
It may have a bed size as small as 100×100 mm and as large as 500x500mm.
Its linear motion system is built on cheap 1/2 inch conduit pipes, which cost 3$ 10ft in the US. So if you want to expand your printer’s bed – spend 3$ more and cut new sizes (do not forget that you will need new belts as well).
This is version 2 of Piper 1 3d printer. Original may be found at https://www.thingiverse.com/thing:2794632
Changes made in version 2 are targeting to improve joints against snapping along layer separation. New joint with joint bracket is solving the problem.
New instructions for Metric and SAE system builds are published at https://piper3dprinters.com
Parts to be printed multiple times:
joint_bracket.v2.stl - 20
2xcorner.v2.stl - 2
Z_support.v2.stl - 2
Z_Motor_Mount.v2.stl - 2
YMount.stl - 2
Z_Coupling_5-16.stl - 2
Zbolt_fix_5-16.stl - 2
Roller_Double.stl - 3 [if you plan to use alternative version for bed than print just 1 for X]
Z-Roller_bracket.stl - 2
XRoller alternative US.stl - 4[you may use 2 double rollers as in original or use 4 alternatives for Y]
Join Piper 1 builders on FB https://www.facebook.com/groups/258663638022956/