Piper 1 version 2 3D Printer
di Piper3D
File stampabili (34)
-
stl2xcorner.v2.stl
146 Ko · 8 851 download
-
stljoint_bracket.v2.stl
122 Ko · 8 856 download
-
stl3xcorner_Right.v2.stl
302 Ko · 8 821 download
-
stl3xcorner_Left.v2.stl
302 Ko · 8 806 download
-
stlZ_support.v2.stl
280 Ko · 8 816 download
-
stlZ_Motor_Mount.v2.stl
115 Ko · 8 801 download
-
stlZ2xcorner_Left.v2.1.stl
158 Ko · 8 754 download
-
stlZ2xcorner_Right.v2.1.stl
158 Ko · 8 748 download
-
stlZbasemount_Left.v2.1.stl
333 Ko · 8 758 download
-
stlZbasemount_Right.v2.1.stl
333 Ko · 8 754 download
-
stlYMount.stl
403 Ko · 8 809 download
-
stlZ_Coupling_5-16.stl
548 Ko · 8 771 download
-
stlZ_Coupling_3-8.stl
553 Ko · 8 756 download
-
stlY_Belt_Holder.stl
643 Ko · 8 871 download
-
stlXwireholder.stl
97 Ko · 8 760 download
-
stlwire_holder_base.stl
96 Ko · 8 760 download
-
stlX_Motor_Mount.stl
321 Ko · 8 787 download
-
stlZbolt_fix_5-16.stl
631 Ko · 8 758 download
-
stlExtruder_wire_mount.stl
116 Ko · 8 737 download
-
stlxBeltHolder.stl
56 Ko · 8 741 download
-
stlZ-Roller_bracket.stl
186 Ko · 8 771 download
-
stlRoller_Sing.stl
1.9 Mo · 8 762 download
-
stlwire_holder.stl
137 Ko · 8 730 download
-
stlybedbeltholder.stl
159 Ko · 8 736 download
-
stlX_Belt_holder.stl
289 Ko · 8 745 download
-
stlExtruder_Mount.stl
227 Ko · 8 735 download
-
stlY_Motor_Mount.stl
82 Ko · 8 730 download
-
stlZbolt_fix_3-8.stl
594 Ko · 8 713 download
-
stlRoller_Double.stl
2.1 Mo · 8 765 download
-
stlextruder_mount_fan_low.stl
2.4 Mo · 8 694 download
-
stlextruder_mount_fan_volcano.stl
2.7 Mo · 8 744 download
-
stlXRoller_alternative_US.stl
516 Ko · 8 580 download
-
stlZ_Roller_Left.v2.1.stl
1.5 Mo · 8 508 download
-
stlZ_Roller_Right.v2.1.stl
1.5 Mo · 8 498 download
Descrizione
[Update 02/20/2022] If you have difficulty downloading, files are also available at https://github.com/piper3d?tab=repositories
[Update: 1.3 upgrade was released https://www.thingiverse.com/thing:3539464]
[Update: Released design files. Look for Piper 1 v 2 US.zip]
[Update: added holes for tensioning screws to Z rollers - Z Roller Left.v2.1.stl and Z Roller Right.v2.1.stl ]
[Update if you use 0.4 mm nozzle to print Z Rollers please use 3/8s washers for the middle bolt]
[Update added alternative version of X Rollers "XRoller alternative US.stl" This is mainly targeted at large bed printers to increase stability along Y axis]
[Update: Z2xCorner and Zbasemount were updated to version 2.1]
[Update: ZRollers were updated please download and reprint them]
[Update Just found an error in Z2Xcorner stl files uploaded a newer version, if you already printed them and the joint bracket is not fitting you will need to file out from the bottom about 0.6mm]
UK version of the printer is at https://www.thingiverse.com/thing:2999885
My Interview to Matt Snow at ERRF 2018 https://youtu.be/ybxNmI4ZSYw.
Piper 1 3D printer is highly scalable, self-replicating 3D printer.
It may have a bed size as small as 100×100 mm and as large as 500x500mm.
Its linear motion system is built on cheap 1/2 inch conduit pipes, which cost 3$ 10ft in the US. So if you want to expand your printer’s bed – spend 3$ more and cut new sizes (do not forget that you will need new belts as well).
This is version 2 of Piper 1 3d printer. Original may be found at https://www.thingiverse.com/thing:2794632
Changes made in version 2 are targeting to improve joints against snapping along layer separation. New joint with joint bracket is solving the problem.
New instructions for Metric and SAE system builds are published at https://piper3dprinters.com
Parts to be printed multiple times:
joint_bracket.v2.stl - 20
2xcorner.v2.stl - 2
Z_support.v2.stl - 2
Z_Motor_Mount.v2.stl - 2
YMount.stl - 2
Z_Coupling_5-16.stl - 2
Zbolt_fix_5-16.stl - 2
Roller_Double.stl - 3 [if you plan to use alternative version for bed than print just 1 for X]
Z-Roller_bracket.stl - 2
XRoller alternative US.stl - 4[you may use 2 double rollers as in original or use 4 alternatives for Y]
Join Piper 1 builders on FB https://www.facebook.com/groups/258663638022956/