Multiwii Pro Flight Controller Case

por poboy

Archivos imprimibles (4)

  • stl

    Multiwii_case_top.stl

    146 Ko · 711 descargas

    Descargar
  • stl

    Multiwii_case_bottom.stl

    153 Ko · 772 descargas

    Descargar
  • stl

    Multiwii_case_top_w_s1s3_ports.stl

    149 Ko · 677 descargas

    Descargar
  • stl

    Multiwii_case_top_w_allportcutouts.stl

    151 Ko · 484 descargas

    Descargar

Descripción

Protective case for the Hobby King Multiwii Pro flight controller (with ATmega 2560 chip).

Update 1/14/14: I added a case top stl file with cutouts for the S1 and S3 ports.

Update 4/2/15: I finally uploaded my case design for the MTK 3329 GPS module that comes with this. http://www.thingiverse.com/thing:752568

Update 5/30/15: Added a case top stl file with cutouts for all ports (S1, S2, S3, and the two I2C ports). You will have to solder headers to the multiwii board for the S1, S3 and I2C if you want to use them. I also added a 4"x6" pdf file of the pinout names - print this at actual size and cut out/affix them to the case. I used an adhesive sheet cut to 4"x6" for printing.