Jet Engine, 3-Spool
por konchan77
Archivos imprimibles (33)
-
stlExhaust-Cone101ws.stl
248 Ko · 7 243 descargas
-
stlDummy-BRG-10mm01.stl
57 Ko · 7 208 descargas
-
stlFan-Duct302.stl
144 Ko · 7 226 descargas
-
stlHPC-Case101.stl
749 Ko · 7 214 descargas
-
stlHPC-Case101a.stl
34 Ko · 7 194 descargas
-
stlDummy-BRG-9mm01.stl
52 Ko · 7 199 descargas
-
stlGB-Angle-Box01.stl
98 Ko · 7 198 descargas
-
stlExhaust-Frame01.stl
553 Ko · 7 200 descargas
-
stlFan-Duct01.stl
198 Ko · 7 203 descargas
-
stlLPT-Inlet-Case01.stl
631 Ko · 7 196 descargas
-
stlFan-Shaft01.stl
141 Ko · 7 187 descargas
-
stlGB-Main-Box01.stl
618 Ko · 7 179 descargas
-
stlGB-Upper-Box01.stl
231 Ko · 7 173 descargas
-
stlFan-Duct301ws.stl
1.9 Mo · 7 178 descargas
-
stlC-Chamber01.stl
793 Ko · 7 177 descargas
-
stlDummy-BRG-7mm01.stl
46 Ko · 7 168 descargas
-
stlHPT-Case01.stl
319 Ko · 7 174 descargas
-
stlHPT-Rotor01.stl
192 Ko · 7 168 descargas
-
stlLP-Front-Stop101.stl
119 Ko · 7 164 descargas
-
stlSpacer-7-06.stl
21 Ko · 7 160 descargas
-
stlStand-Front101.stl
74 Ko · 7 158 descargas
-
stlSpinner01ws.stl
307 Ko · 7 167 descargas
-
stlStand-Rear101.stl
94 Ko · 7 149 descargas
-
stlIPT-Rotor101.stl
563 Ko · 7 163 descargas
-
stlIPC-Inlet-Case101.stl
2.1 Mo · 7 163 descargas
-
stlIPC-Case01.stl
605 Ko · 7 137 descargas
-
stlIPC-Rotor101ws.stl
2.5 Mo · 7 151 descargas
-
stlSpinner01ws-Test01.stl
1.1 Mo · 7 153 descargas
-
stlHPC-Rotor101ws.stl
1.3 Mo · 7 142 descargas
-
stlLPT-Rotor101ws.stl
2.5 Mo · 7 147 descargas
-
stlFan-Blade201ws.stl
5.5 Mo · 7 398 descargas
-
stlIPC-Rotor101.stl
1.3 Mo · 1 089 descargas
-
stlHPC-Rotor101.stl
1.2 Mo · 1 088 descargas
Descripción
For the latest jet engine for passenger planes, the Bypass Ratio is bigger and bigger to improve the engine-performance.
In order for one of them, the 3-spool system is developed. The 3D model for explaining this system was designed and made.
The points of the design are;
- For the rotation of each spool, the ball bearing method and the dummy bearing method are prepared.
All stator vanes are omitted this time, because of avoiding rub of vanes and blades. And each rotor is designed with support so that it can be printed as one-piece.
The blade angle is made to agree in the spool rotational direction (View from Rear).- HP Spool: Clockwise
- IP Spool: Counter Clockwise
- LP Spool: Counter Clockwise
- In addition, some parts that printing is considered difficult without support, are prepared STL file with support. The last of two digits of the file name is identified as "ws". In order to ease understanding about the contents of each part and the assembly order, parts breakdown and list are prepared.
Download files includes;
-files: STL Files
-images: Parts Breakdown for assembly Aid
-Excel File: Parts List
Purchase Parts Information;
-Bearings (Can be used Dummy BRGs instead of the followings, See Parts List)
DDL-1370ZZ (7 x 13 x 4) 2ea - For IP-Spool
689ZZ (9 x 17 x 5) 2ea - For HP-Spool
6900ZZ (10 x 22 x 6) 2ea - For LP-Spool
-Aluminum Tubes
See Parts List
-Screws
Micro screws M1.4x3L - Appox. 50 ea - Direct screw-in to 1 mm dia hole (No nut),
Screws M2 x 6L - 6 ea, See Parts List
Assembly Points
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.
Total Net Print Time: Approx. 42HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted.
[Update]
Optional Fan; https://www.thingiverse.com/thing:2794855 - 2018.2.15
Modified Rotor; https://www.thingiverse.com/thing:2833968 - 2018.3.21
Parts-List011.csv was uploaded - 2020.5.19
No support rotors "IPC-Rotor101" & "HPC-Rotor101" are added as reference. - 2020.6.24
LPT Rotor illust changed - 2021.7.14