VOID9 Macropad

por V0lD

Archivos imprimibles (4)

  • stl

    VOID9_-_Top_-_Flat.stl

    102 Ko · 1 375 descargas

    Descargar
  • stl

    VOID9_-_Top_-_Fillet.stl

    227 Ko · 1 559 descargas

    Descargar
  • stl

    VOID9_-_Bottom_-_Flat.stl

    283 Ko · 1 515 descargas

    Descargar
  • stl

    VOID9_-_Bottom_-_Angled.stl

    358 Ko · 1 347 descargas

    Descargar

Descripción

This thing is no longer maintained. Updated models hosted on Printables/Github.

Description

The VOID9 Macropad is a handwired 3x3 pad that uses a Pro Micro as a controller.
Two versions for the top case are included, one of them is flat, the other has a 4mm fillet.
There are two versions for the bottom case as well, a flat one, and a 5 degree angled version.

Handwiring guide

I've put together a pretty visual handwiring guide for this macropad; the same principles would apply for larger projects, such as a VOID40.

Bill of materials

4 x M3x10 allen head screws for the bottom/top corners (13mm overall length, 5.5mm diameter head)
hot glue for securing the Pro Micro to the bottom case

STL mirror / QMK fork

The files are also hosted on Github, along with a QMK fork that contains a basic keymap and experimental VIA Configurator support. More info here

Updates

14.04.2020
slightly increased outer wall thickness around the screw holes

16.03.2020
added a small inner fillet

Etiquetas

#3x3 #cherry #handwired #keyboard #macropad #mechanical #mechanical keyboard #Numpad #olkb #ortholinear #qmk #switch