Steam Engine Train Leviathan
por mardur
Archivos imprimibles (65)
-
stlrail-slab_many.stl
4 Ko · 2 224 descargas
-
stldrive-link1_x2.stl
38 Ko · 2 193 descargas
-
stlrailing_x2.stl
403 Ko · 2 203 descargas
-
stlheadlight-base.stl
341 Ko · 2 206 descargas
-
stlaxle-front-L.stl
265 Ko · 2 193 descargas
-
stlaxle-front-R.stl
270 Ko · 2 181 descargas
-
stlboiler4.stl
481 Ko · 2 184 descargas
-
stlpressure-pipe.stl
794 Ko · 2 192 descargas
-
stlcabin-bottom.stl
136 Ko · 2 186 descargas
-
stlboiler1-handrail-L.stl
191 Ko · 2 188 descargas
-
stlcabin-top-L.stl
40 Ko · 2 194 descargas
-
stlcontrol-lever.stl
52 Ko · 2 189 descargas
-
stlboiler-ring2.stl
94 Ko · 2 194 descargas
-
stlboiler5.stl
343 Ko · 2 206 descargas
-
stlconnector-pipe_x2.stl
379 Ko · 2 182 descargas
-
stlaxle-connector_x4.stl
724 Ko · 2 191 descargas
-
stldrive-rod_x2.stl
83 Ko · 2 188 descargas
-
stlrail-200_x2.stl
146 Ko · 2 185 descargas
-
stldrive-link2_x2.stl
27 Ko · 2 192 descargas
-
stlboiler-ring5-bell.stl
293 Ko · 2 187 descargas
-
stlaxle-socket+0.5_x4.stl
186 Ko · 2 183 descargas
-
stlpressure-socket.stl
100 Ko · 2 182 descargas
-
stlboiler6.stl
296 Ko · 2 186 descargas
-
stlheadlight-glass.stl
69 Ko · 2 175 descargas
-
stlwheel-small_x4.stl
825 Ko · 2 181 descargas
-
stlcabin-top-F.stl
138 Ko · 2 191 descargas
-
stlfender-bar-R.stl
23 Ko · 2 193 descargas
-
stlfender.stl
546 Ko · 2 186 descargas
-
stlwheel-large_x4.stl
282 Ko · 2 215 descargas
-
stlwheel-screw-cap_x4.stl
166 Ko · 2 195 descargas
-
stlcenter-rail-R.stl
190 Ko · 2 194 descargas
-
stlboiler1-handrail-R.stl
191 Ko · 2 182 descargas
-
stlcontrol-panel.stl
880 Ko · 2 194 descargas
-
stldrive-cylinder-R.stl
540 Ko · 2 191 descargas
-
stlcabin-top-R.stl
40 Ko · 2 196 descargas
-
stlpressure-outlet_x2.stl
571 Ko · 2 191 descargas
-
stldrive-guide-top_x2.stl
22 Ko · 2 188 descargas
-
stlboiler2.stl
255 Ko · 2 195 descargas
-
stlheadlight-socket-R.stl
278 Ko · 2 190 descargas
-
stlaxle-socket-cap+0.5_x4.stl
201 Ko · 2 184 descargas
-
stlheadlight.stl
122 Ko · 2 194 descargas
-
stlfender-bar-L.stl
23 Ko · 2 190 descargas
-
stlboiler1.stl
307 Ko · 2 180 descargas
-
stlcabin-glass-rear_x2.stl
69 Ko · 2 180 descargas
-
stlcabin-glass-front-large_x2.stl
1 Ko · 2 181 descargas
-
stlcabin-glass-front-small_x2.stl
1 Ko · 2 181 descargas
-
stldrive-guide-bottom-L.stl
7 Ko · 2 194 descargas
-
stlexhaust.stl
954 Ko · 2 207 descargas
-
stlcabin-top-B.stl
58 Ko · 2 186 descargas
-
stlheadlight-socket-L.stl
278 Ko · 2 185 descargas
-
stlcabin-roof-L.stl
79 Ko · 2 197 descargas
-
stlcabin-glass-side_x4.stl
1 Ko · 2 175 descargas
-
stlboiler-ring3_x3.stl
71 Ko · 2 185 descargas
-
stlcabin-roof-R.stl
79 Ko · 2 199 descargas
-
stlboiler3.stl
197 Ko · 2 185 descargas
-
stlboiler-ring1.stl
72 Ko · 2 193 descargas
-
stlvent-pipe.stl
466 Ko · 2 186 descargas
-
stlcenter-rail-L.stl
190 Ko · 2 184 descargas
-
stldrive-guide-bottom-R.stl
7 Ko · 2 189 descargas
-
stlbell.stl
1.2 Mo · 2 183 descargas
-
stlboiler8.stl
1.9 Mo · 2 210 descargas
-
stlpressure-cap.stl
571 Ko · 2 207 descargas
-
stldrive-cylinder-L.stl
540 Ko · 2 193 descargas
-
stlboiler7.stl
3.4 Mo · 2 207 descargas
-
stldrive-cap_x2.stl
241 Ko · 2 196 descargas
Descripción
Detailed steam engine train loosely modeled after the number 63 Leviathan.
Matching tender is available at https://www.thingiverse.com/thing:4772254
The model is not to any scale and not an accurate replica, particularly for the wheel sockets and the cabin.
Most parts can be printed without or only very little support. Careful, there are more than 100 pieces to the entire model. If parts are to be printed multiple times, the amount is indicated in brackets in the filename.
A standard LED can be placed inside the lantern and cables will run inside the model towards the cabin. Another LED might be placed loosely inside the boiler to indicate the burning fire.
The details in the model are designed to be printed with 0.4mm nozzle FDM at 0.2mm layer height. I personally printed it on an Ender 3 in PLA. Most parts will be glued in place. Some parts (especially the wheels) are supposed to be attached with M2x20mmm screws. Any other diameter or length will not fit. Sorry about that.
The wheels and drive mechanism are theoretically moving, but at least for my print, the tolerances are too tight for smooth movement. I am not particularly happy with the wheel sockets either. I should come up with a better solution there.