Steam Engine Train Leviathan
door mardur
Printbare bestanden (65)
-
stlrail-slab_many.stl
4 Ko · 2 220 downloads
-
stldrive-link1_x2.stl
38 Ko · 2 190 downloads
-
stlrailing_x2.stl
403 Ko · 2 200 downloads
-
stlheadlight-base.stl
341 Ko · 2 203 downloads
-
stlaxle-front-L.stl
265 Ko · 2 189 downloads
-
stlaxle-front-R.stl
270 Ko · 2 179 downloads
-
stlboiler4.stl
481 Ko · 2 182 downloads
-
stlpressure-pipe.stl
794 Ko · 2 189 downloads
-
stlcabin-bottom.stl
136 Ko · 2 182 downloads
-
stlboiler1-handrail-L.stl
191 Ko · 2 185 downloads
-
stlcabin-top-L.stl
40 Ko · 2 190 downloads
-
stlcontrol-lever.stl
52 Ko · 2 187 downloads
-
stlboiler-ring2.stl
94 Ko · 2 191 downloads
-
stlboiler5.stl
343 Ko · 2 202 downloads
-
stlconnector-pipe_x2.stl
379 Ko · 2 180 downloads
-
stlaxle-connector_x4.stl
724 Ko · 2 188 downloads
-
stldrive-rod_x2.stl
83 Ko · 2 185 downloads
-
stlrail-200_x2.stl
146 Ko · 2 179 downloads
-
stldrive-link2_x2.stl
27 Ko · 2 188 downloads
-
stlboiler-ring5-bell.stl
293 Ko · 2 183 downloads
-
stlaxle-socket+0.5_x4.stl
186 Ko · 2 180 downloads
-
stlpressure-socket.stl
100 Ko · 2 178 downloads
-
stlboiler6.stl
296 Ko · 2 181 downloads
-
stlheadlight-glass.stl
69 Ko · 2 171 downloads
-
stlwheel-small_x4.stl
825 Ko · 2 178 downloads
-
stlcabin-top-F.stl
138 Ko · 2 189 downloads
-
stlfender-bar-R.stl
23 Ko · 2 190 downloads
-
stlfender.stl
546 Ko · 2 184 downloads
-
stlwheel-large_x4.stl
282 Ko · 2 213 downloads
-
stlwheel-screw-cap_x4.stl
166 Ko · 2 191 downloads
-
stlcenter-rail-R.stl
190 Ko · 2 190 downloads
-
stlboiler1-handrail-R.stl
191 Ko · 2 180 downloads
-
stlcontrol-panel.stl
880 Ko · 2 192 downloads
-
stldrive-cylinder-R.stl
540 Ko · 2 189 downloads
-
stlcabin-top-R.stl
40 Ko · 2 193 downloads
-
stlpressure-outlet_x2.stl
571 Ko · 2 189 downloads
-
stldrive-guide-top_x2.stl
22 Ko · 2 184 downloads
-
stlboiler2.stl
255 Ko · 2 193 downloads
-
stlheadlight-socket-R.stl
278 Ko · 2 188 downloads
-
stlaxle-socket-cap+0.5_x4.stl
201 Ko · 2 182 downloads
-
stlheadlight.stl
122 Ko · 2 191 downloads
-
stlfender-bar-L.stl
23 Ko · 2 185 downloads
-
stlboiler1.stl
307 Ko · 2 177 downloads
-
stlcabin-glass-rear_x2.stl
69 Ko · 2 178 downloads
-
stlcabin-glass-front-large_x2.stl
1 Ko · 2 177 downloads
-
stlcabin-glass-front-small_x2.stl
1 Ko · 2 178 downloads
-
stldrive-guide-bottom-L.stl
7 Ko · 2 189 downloads
-
stlexhaust.stl
954 Ko · 2 205 downloads
-
stlcabin-top-B.stl
58 Ko · 2 184 downloads
-
stlheadlight-socket-L.stl
278 Ko · 2 183 downloads
-
stlcabin-roof-L.stl
79 Ko · 2 193 downloads
-
stlcabin-glass-side_x4.stl
1 Ko · 2 171 downloads
-
stlboiler-ring3_x3.stl
71 Ko · 2 183 downloads
-
stlcabin-roof-R.stl
79 Ko · 2 195 downloads
-
stlboiler3.stl
197 Ko · 2 180 downloads
-
stlboiler-ring1.stl
72 Ko · 2 190 downloads
-
stlvent-pipe.stl
466 Ko · 2 183 downloads
-
stlcenter-rail-L.stl
190 Ko · 2 180 downloads
-
stldrive-guide-bottom-R.stl
7 Ko · 2 186 downloads
-
stlbell.stl
1.2 Mo · 2 180 downloads
-
stlboiler8.stl
1.9 Mo · 2 208 downloads
-
stlpressure-cap.stl
571 Ko · 2 203 downloads
-
stldrive-cylinder-L.stl
540 Ko · 2 190 downloads
-
stlboiler7.stl
3.4 Mo · 2 202 downloads
-
stldrive-cap_x2.stl
241 Ko · 2 192 downloads
Beschrijving
Detailed steam engine train loosely modeled after the number 63 Leviathan.
Matching tender is available at https://www.thingiverse.com/thing:4772254
The model is not to any scale and not an accurate replica, particularly for the wheel sockets and the cabin.
Most parts can be printed without or only very little support. Careful, there are more than 100 pieces to the entire model. If parts are to be printed multiple times, the amount is indicated in brackets in the filename.
A standard LED can be placed inside the lantern and cables will run inside the model towards the cabin. Another LED might be placed loosely inside the boiler to indicate the burning fire.
The details in the model are designed to be printed with 0.4mm nozzle FDM at 0.2mm layer height. I personally printed it on an Ender 3 in PLA. Most parts will be glued in place. Some parts (especially the wheels) are supposed to be attached with M2x20mmm screws. Any other diameter or length will not fit. Sorry about that.
The wheels and drive mechanism are theoretically moving, but at least for my print, the tolerances are too tight for smooth movement. I am not particularly happy with the wheel sockets either. I should come up with a better solution there.