Ready RepRap

di dhartkop

File stampabili (10)

  • stl

    170116_ReadyRepRap_Endstop.stl

    28 Ko · 32 308 download

    Scarica
  • stl

    170116_ReadyRepRap_Idler.stl

    27 Ko · 32 244 download

    Scarica
  • stl

    170116_ReadyRepRap_Hotend.stl

    57 Ko · 32 226 download

    Scarica
  • stl

    170116_ReadyRepRap_SpoolHolder2.stl

    72 Ko · 32 201 download

    Scarica
  • stl

    170116_ReadyRepRap_Motor.stl

    49 Ko · 32 183 download

    Scarica
  • stl

    170116_ReadyRepRap_SpoolHolder1.stl

    71 Ko · 32 155 download

    Scarica
  • stl

    170116_ReadyRepRap_BuildPlate.stl

    58 Ko · 32 144 download

    Scarica
  • stl

    170116_ReadyRepRap_Carriage.stl

    181 Ko · 32 160 download

    Scarica
  • stl

    170116_ReadyRepRap_AllParts.stl

    1.4 Mo · 32 193 download

    Scarica
  • stl

    170116_ReadyRepRap_Pulleys.stl

    953 Ko · 32 116 download

    Scarica

Descrizione

The Ready RepRap is a delta type 3D printer designed to be quickly assembled in a classroom with minimal tools using mostly low cost easily available parts. The design uses a minimal 3d-printed parts count.

The printer uses electrical metal tubing (EMT) for the linear motion rails, and commonly available electrical boxes to squarely mount the tubes between a wooden top and base.

The Ready RepRap is designed around an Arduino type microcontroller such as the Mega/RAMPS running open source firmware such as Marlin. The controller parts, stepper motors, hotend, and filament extruder are parts that will need to be ordered online.

The printer can be configured to print with either ABS or PLA type filaments, and has a cylindrical build volume measuring 10 inches in diameter and up to 12 inches tall.

The hardware scheme is very easy to scale up or down for different versions of this printer if you want to experiment on your own!