Mini DVD/CD-ROM Based Printer

di EmmettGrames

File stampabili (7)

  • stl

    DVD3DP_rail.stl

    12 Ko · 2 259 download

    Scarica
  • stl

    DVD3DP_Hotend_Clamp.stl

    68 Ko · 2 260 download

    Scarica
  • stl

    DVD3DP_Y_Gantry.stl

    121 Ko · 2 270 download

    Scarica
  • stl

    DVD3DP_X_Gantry.stl

    174 Ko · 2 261 download

    Scarica
  • stl

    DVD3DP_Main_Frame.stl

    184 Ko · 2 276 download

    Scarica
  • stl

    DVD3DP_Z_Gantry.stl

    187 Ko · 2 264 download

    Scarica
  • stl

    DVD3DP_leadscrew.stl

    874 Ko · 2 266 download

    Scarica

Descrizione

This is a design for a 3D printer using the stepper motors from old CD drives and Arduino. To mount the steppers, you need to cut and bend the original mounting brackets, and glue the leadscrew into the middle of the printed ones. You will also need to come up with some sort of bed and levelling system.

I wasn't happy with the tiny build space offered by most e-waste printer designs out there, so I designed this. It should end up with a build volume of nearly 150mm cubed.

The X gantry is designed to fit an E3D v6 hotend.

Best printed at high resolution, sanded, and epoxy finished. A little lube never hurts, either.

Tag

#3d printer #cdrom #e-waste #E3D v6 #miniature