Factorio Spidertron
di warmarine759
File stampabili (11)
-
stlFactorio_Spidertron_Solid.stl
30.8 Mo · 1 378 download
-
stlFactorio_Spidertron_smol_leg_bolts.stl
1.1 Mo · 721 download
-
stlFactorio_Spidertron_smol_leg_upright.stl
1 Mo · 692 download
-
stlFactorio_Spidertron_smol_leg.stl
1.4 Mo · 686 download
-
stlFactorio_Spidertron_smol_body.stl
8.6 Mo · 693 download
-
stlFactorio_Spidertron_leg_Vertical_Clips.stl
1.8 Mo · 88 download
-
stlFactorio_Spidertron_long_knee_Clips_clip_only.stl
590 Ko · 90 download
-
3mfFactorio_Spidertron_8x_leg_Vertical_Sprews.3mf
4.6 Mo · 89 download
-
stlFactorio_Spidertron_v4_base_screws.stl
8.5 Mo · 111 download
-
stlFactorio_Spidertron_plastic_thigh_screw.stl
1.2 Mo · 88 download
-
3mfFactorio_Spidertron_plastic_plastic_bolt.3mf
42 Ko · 88 download
Descrizione
Spidertron Spidertron does whatever a Spidertron does
Needs only a little bit of supports you should be able to print the leg parts without supports with "engineered failure" cleaning up some of the small midair print spots
No longer needs any extra parts!
tolerances are tight so please message me with your results!
I printed on a Bambu A1 mini
The long legs print vertically.
I included an 8x sprew version.
The hole in the center is for 1.75mm filament for increased strength.
Added a smaller version that should print and assemble much easier. Doesn't require any extra hardware (other than glue)
only needs supports only under the front of the legs the rest should be bridging