Make it Fly
door amandasubic
Printbare bestanden (12)
-
stlShaft_Left_Wing.stl
13 Ko · 1 095 downloads
-
stlShaft_Right_Wing.stl
13 Ko · 1 098 downloads
-
stlGear_Left_Wing.stl
49 Ko · 1 086 downloads
-
stlshaft_caps.stl
102 Ko · 1 089 downloads
-
stlGear_Right_Wing.stl
70 Ko · 1 080 downloads
-
stleagle_wing_Left_backMOD.stl
89 Ko · 1 133 downloads
-
stleagle_wing_Right_backmod.stl
217 Ko · 1 141 downloads
-
stlcrank_long.stl
80 Ko · 1 086 downloads
-
stlCrankshaft.stl
85 Ko · 1 084 downloads
-
stlConnecting_Rod.stl
35 Ko · 1 081 downloads
-
objEagle_donotprint.obj
15.6 Mo · 1 051 downloads
-
stlEagle_base.stl
17 Mo · 1 102 downloads
Beschrijving
This is a remix of filiptheking's "Make it Sink" model. I utilized the same gear mechanisms (which made the original man's arms move) to make the eagle's wings move. The eagle base was modified from the "100% Eagle" model by andypop.
I used the MakerBot Replicator 2 to print this model. The eagle base should be printed with at least 40% infill, with raft and supports, resolution is not critical for the base only. Crank, gears, and shafts should be printed without supports, 40-100% infill, and layer height of 0.10mm. All pieces were designed to fit together without the need for glue, but if pieces are loose you can use hot glue. Please see the included "Readme.txt" file for complete instructions.
You can watch a demonstration of the wing movement in the short video clip: https://youtu.be/pAC5DPbmMYo
And here is a video to help with assembly of the parts after printing: https://youtu.be/Y87DWqP1Y2c