Rfid card reader Case
door ISHAVEYOU
1 / 3
Printbare bestanden (0)
Geen STL- / OBJ- / STEP-bestand beschikbaar voor dit stuk.
Beschrijving
A case to make a RFID card Reader for a 7inch touchscreen and a RC522 Card reader at the indentation. To screw everything together you use three M2x46mm bolts to hold everything together and a M2x10 mm bolt to hold the raspberry pi to the case. This was for my matura project. There is a place where you can put you power bank to power this project.