Rfid card reader Case
por ISHAVEYOU
Ficheiros imprimíveis (2)
-
stlLower_case_card_reader_ma.stl
1.6 Mo · 973 descargas
-
stlUpper_case_card_reader_ma.stl
1.6 Mo · 949 descargas
Descrição
A case to make a RFID card Reader for a 7inch touchscreen and a RC522 Card reader at the indentation. To screw everything together you use three M2x46mm bolts to hold everything together and a M2x10 mm bolt to hold the raspberry pi to the case. This was for my matura project. There is a place where you can put you power bank to power this project.