Electron Rocket
door WilliamW
Printbare bestanden (26)
-
stlStage_1_Engines_Thicker_rev01.STL
1.1 Mo · 2 471 downloads
-
stlPayload_Platform_Black.STL
58 Ko · 4 049 downloads
-
stlStage_1_Bottom_Ring_Grey.STL
23 Ko · 4 047 downloads
-
stlStage_1_Engines_Grey.STL
1.2 Mo · 4 130 downloads
-
stlStage_1_Top_Ring_Grey.STL
23 Ko · 4 032 downloads
-
stlStage_2_Engine_Grey.STL
142 Ko · 4 041 downloads
-
stlStage_2_Small_Cylindrical_Tank_Grey.STL
408 Ko · 4 032 downloads
-
stlStage_2_Top_Ring_Grey.STL
156 Ko · 4 040 downloads
-
stlT.STL
1 Ko · 2 770 downloads
-
stlC.STL
15 Ko · 2 770 downloads
-
stlO.STL
27 Ko · 2 771 downloads
-
stlL.STL
7 Ko · 2 771 downloads
-
stlE.STL
11 Ko · 2 776 downloads
-
stlN.STL
16 Ko · 2 761 downloads
-
stlR.STL
20 Ko · 2 766 downloads
-
stlMounts.STL
37 Ko · 2 786 downloads
-
stlPayload_Fairing_rev1.STL
293 Ko · 2 813 downloads
-
stlStage_1_Battery_Pack_rev1.STL
33 Ko · 2 794 downloads
-
stlStage_2_Tank_rev1.STL
81 Ko · 2 772 downloads
-
stlStage_2_Small_Batteries_Grey.STL
184 Ko · 2 239 downloads
-
stlStage_2_Engine_Nozzle_rev1.STL
420 Ko · 2 084 downloads
-
stlStage_1_Engines_rev1.STL
1.2 Mo · 2 073 downloads
-
stl
Stage_1_Cover.STL
50 Ko · 1 663 downloads
-
stl
Stage_2_Cover.STL
52 Ko · 1 648 downloads
-
stlStage_1_Tank_rev2.STL
37 Ko · 1 473 downloads
-
stlStage_2_Tank_rev1.STL
81 Ko · 1 453 downloads
Beschrijving
15/04/2020
I combined Stage_2_Engine_Cover_rev1 and Stage_1_Tank_rev1 to make Stage_1_Tank_rev2. Also small change to Stage_2_Tank_rev1 to fit bigger stage 2 nozzle
update
Changed it around a bit to more resemble electron. Added covers, vehicle mounts and lettering.
1/60th Model of Rocket Labs Electron Rocket.
Designed from pictures and wiki for height and diameter.
Electron is a two-stage launch vehicle which uses Rocket Lab's Rutherford liquid engines on both stages. The vehicle is capable of delivering payloads of 150 kg to a 500 km Sun-synchronous orbit.
The Rutherford engine uses pumps that are uniquely powered by battery-powered electric motors rather than a gas generator, expander, or preburner. The engine is also fabricated largely by 3D printing, via electron beam melting
I Designed this to compare the Electron to the Saturn V (https://www.thingiverse.com/thing:911891) Saturn V in picture is not yet complete missing first stage.
Printed in Black and Grey 0.2mm layer for most. 0.1mm on the little Rutherford's
Need some glue to attach nozzle and tiny tanks on the stage 2 engine. Everything else should press fit.
Some sign writing would finish it of pretty good too.