Stackable, Labeled Organizer Bin - Gridfinity Compatible - No Supports!
door HunterK55
Printbare bestanden (12)
-
stlGridfinity_Cubes_1x1x4.STL
540 Ko · 337 downloads
-
stlGridfinity_Cubes_2x1x12.STL
1 Mo · 290 downloads
-
stlGridfinity_Cubes_2x1x6.STL
1 Mo · 308 downloads
-
stlGridfinity_Cubes_2x1x4.STL
1 Mo · 285 downloads
-
stlGridfinity_Cubes_1x1x12-1.STL
493 Ko · 282 downloads
-
stlGridfinity_Cubes_1x1x6.STL
515 Ko · 316 downloads
-
stlGridfinity_Cubes_3x1x12.STL
1.4 Mo · 78 downloads
-
stlGridfinity_Cubes_3x1x6.STL
1.4 Mo · 84 downloads
-
stlGridfinity_Cubes_3x1x4.STL
1.4 Mo · 83 downloads
-
stlGridfinity_Cubes_2x2x12.STL
1.8 Mo · 86 downloads
-
stlGridfinity_Cubes_2x2x6.STL
1.8 Mo · 86 downloads
-
stlGridfinity_Cubes_2x2x4.STL
1.8 Mo · 80 downloads
Beschrijving
Fully stackable Gridfinity compatible bins. No supports required for printing. Designed for our grid setup to sort hardware at work.
They have an angled face for labels to be applied, and the heights are adjusted slightly so when stacked they are all the same height. There is a cutout in the back for increased visibility of the label for the bin behind.
Designed for 12mm wide labels, 35mm and 70mm lengths work well if your label maker can be programmed for that.
UPDATE 3.18.2026
Added configurations for 2x2 and 3x1 bins. These versions are still stackable and require no support.