Stackable, Labeled Organizer Bin - Gridfinity Compatible - No Supports!
por HunterK55
Ficheiros imprimíveis (12)
-
stlGridfinity_Cubes_1x1x4.STL
540 Ko · 339 descargas
-
stlGridfinity_Cubes_2x1x12.STL
1 Mo · 291 descargas
-
stlGridfinity_Cubes_2x1x6.STL
1 Mo · 308 descargas
-
stlGridfinity_Cubes_2x1x4.STL
1 Mo · 287 descargas
-
stlGridfinity_Cubes_1x1x12-1.STL
493 Ko · 283 descargas
-
stlGridfinity_Cubes_1x1x6.STL
515 Ko · 317 descargas
-
stlGridfinity_Cubes_3x1x12.STL
1.4 Mo · 79 descargas
-
stlGridfinity_Cubes_3x1x6.STL
1.4 Mo · 86 descargas
-
stlGridfinity_Cubes_3x1x4.STL
1.4 Mo · 84 descargas
-
stlGridfinity_Cubes_2x2x12.STL
1.8 Mo · 88 descargas
-
stlGridfinity_Cubes_2x2x6.STL
1.8 Mo · 87 descargas
-
stlGridfinity_Cubes_2x2x4.STL
1.8 Mo · 81 descargas
Descrição
Fully stackable Gridfinity compatible bins. No supports required for printing. Designed for our grid setup to sort hardware at work.
They have an angled face for labels to be applied, and the heights are adjusted slightly so when stacked they are all the same height. There is a cutout in the back for increased visibility of the label for the bin behind.
Designed for 12mm wide labels, 35mm and 70mm lengths work well if your label maker can be programmed for that.
UPDATE 3.18.2026
Added configurations for 2x2 and 3x1 bins. These versions are still stackable and require no support.