Socket Trays
door handsomeharold
Printbare bestanden (22)
-
stl38_Drive_Spark_Plug.stl
760 Ko · 1 023 downloads
-
stl38_Drive_Torx_Bits.stl
5.5 Mo · 1 021 downloads
-
stl38_Drive_Metric_Hex.stl
3.5 Mo · 1 104 downloads
-
stl38_Drive_SAE_Hex.stl
3.8 Mo · 994 downloads
-
stl14_Drive_Bit_Sockets.stl
7.1 Mo · 1 051 downloads
-
stlMetric_1_2_Drive_Shallow_12_Point.stl
2.1 Mo · 1 038 downloads
-
stlMetric_1_2_Drive_Shallow.stl
6.2 Mo · 966 downloads
-
stlMetric_1_2_Drive_Deep.stl
6.8 Mo · 1 027 downloads
-
stlMetric_3_8_Drive_Shallow.stl
7.2 Mo · 1 071 downloads
-
stlMetric_3_8_Drive_Deep.stl
9.7 Mo · 1 091 downloads
-
stlSAE_12_Drive_Shallow_12_POINT.stl
2.1 Mo · 938 downloads
-
stlSAE_1_2_Drive_Shallow.stl
6 Mo · 962 downloads
-
stlSAE_1_2_Drive_Deep.stl
6.7 Mo · 970 downloads
-
stlSAE_3_8_Drive_Shallow.stl
8.3 Mo · 979 downloads
-
stlSAE_3_8_Drive_Deep.stl
7.7 Mo · 662 downloads
-
stl8_Drive_Spark_Plug_Sockets.stl
1.6 Mo · 118 downloads
-
stl8_Drive_Oil_Filter_Sockets.stl
3.1 Mo · 119 downloads
-
stl12_Drive_Non_Marring_Impact_Sockets.stl
3.6 Mo · 118 downloads
-
stl14_SAE_Deep.stl
1012 Ko · 121 downloads
-
stl14_SAE_Shallow.stl
1.2 Mo · 122 downloads
-
stl12_Metric_Impact_Sockets.stl
3.9 Mo · 122 downloads
-
stl8_Drive_Extraction_Sockets.stl
2.9 Mo · 118 downloads
Beschrijving
Modeled my own trays based on the original design for the 1/4" sockets. I sized them to fit perfectly in the drawers together of a 27x18" tool chest drawer, but could obviously be used in any drawer. The corners are also cut on the larger trays to allow them to all fit on the build plate of an X1C (256x256mm) in 1 piece. Printed with a filament change to easily highlight labels and to give me a method for color coding.
the sockets are a "master set" of Maximum sockets from Canadian Tire, and the spark plug extension sockets are "Mixpower" from Amazon.
If you make these trays for yourself, id love to see you post a make!