Socket Trays
por handsomeharold
Ficheiros imprimíveis (22)
-
stl38_Drive_Spark_Plug.stl
760 Ko · 1 023 descargas
-
stl38_Drive_Torx_Bits.stl
5.5 Mo · 1 021 descargas
-
stl38_Drive_Metric_Hex.stl
3.5 Mo · 1 104 descargas
-
stl38_Drive_SAE_Hex.stl
3.8 Mo · 994 descargas
-
stl14_Drive_Bit_Sockets.stl
7.1 Mo · 1 051 descargas
-
stlMetric_1_2_Drive_Shallow_12_Point.stl
2.1 Mo · 1 038 descargas
-
stlMetric_1_2_Drive_Shallow.stl
6.2 Mo · 966 descargas
-
stlMetric_1_2_Drive_Deep.stl
6.8 Mo · 1 027 descargas
-
stlMetric_3_8_Drive_Shallow.stl
7.2 Mo · 1 071 descargas
-
stlMetric_3_8_Drive_Deep.stl
9.7 Mo · 1 091 descargas
-
stlSAE_12_Drive_Shallow_12_POINT.stl
2.1 Mo · 938 descargas
-
stlSAE_1_2_Drive_Shallow.stl
6 Mo · 962 descargas
-
stlSAE_1_2_Drive_Deep.stl
6.7 Mo · 970 descargas
-
stlSAE_3_8_Drive_Shallow.stl
8.3 Mo · 979 descargas
-
stlSAE_3_8_Drive_Deep.stl
7.7 Mo · 662 descargas
-
stl8_Drive_Spark_Plug_Sockets.stl
1.6 Mo · 118 descargas
-
stl8_Drive_Oil_Filter_Sockets.stl
3.1 Mo · 119 descargas
-
stl12_Drive_Non_Marring_Impact_Sockets.stl
3.6 Mo · 118 descargas
-
stl14_SAE_Deep.stl
1012 Ko · 121 descargas
-
stl14_SAE_Shallow.stl
1.2 Mo · 122 descargas
-
stl12_Metric_Impact_Sockets.stl
3.9 Mo · 122 descargas
-
stl8_Drive_Extraction_Sockets.stl
2.9 Mo · 118 descargas
Descrição
Modeled my own trays based on the original design for the 1/4" sockets. I sized them to fit perfectly in the drawers together of a 27x18" tool chest drawer, but could obviously be used in any drawer. The corners are also cut on the larger trays to allow them to all fit on the build plate of an X1C (256x256mm) in 1 piece. Printed with a filament change to easily highlight labels and to give me a method for color coding.
the sockets are a "master set" of Maximum sockets from Canadian Tire, and the spark plug extension sockets are "Mixpower" from Amazon.
If you make these trays for yourself, id love to see you post a make!