HyperCube Evolution - TW HEVO Edition
por otaku521
Ficheiros imprimíveis (58)
-
stlXY_Carriage_Clamp_HCEvo_10mm_Bearing_v2.stl
62 Ko · 5 656 descargas
-
stlXY_Carriage_HCEvo_X10_Y10.stl
1.3 Mo · 5 653 descargas
-
stlZ_Nut_Braket_1.2.1_Ball_screw_1204.stl
161 Ko · 5 632 descargas
-
stlHEVO_-_Z_Upper_Rod_Holder_3.stl
115 Ko · 5 641 descargas
-
stlZ_Axis_Linear_Rail_Bracket_-_Right_1.0.stl
190 Ko · 5 619 descargas
-
stlZ_Axis_Linear_Rail_Bracket_-_Left_1.0.stl
190 Ko · 5 595 descargas
-
stlZ_STEPPER_MOUNT_v2.stl
87 Ko · 5 623 descargas
-
stlHEVO_-_Extruder_-_Direct_Drive_-_E3D_V6_5015_Radial_Fan_Duct_for_v1_v2.stl
45 Ko · 5 583 descargas
-
stlHEVO_-_Extruder_-_Side_loading_5015Fanduct_v2.stl
70 Ko · 5 614 descargas
-
stlHEVO_-_Extruder_-_Bowden_E3D_V6_Retainer_30mm_Fan.stl
127 Ko · 5 606 descargas
-
stlHEVO_-_Extruder_-_Bowden_E3D_V6_Retainer_No_Fan.stl
254 Ko · 5 600 descargas
-
stlHEVO_-_Extruder_-_Direct_Drive_Bondtech.stl
196 Ko · 5 631 descargas
-
stlHEVO_-_Extruder_-_Direct_Drive_Bondtech_Mirror_Aero_v2.stl
185 Ko · 5 629 descargas
-
stlHEVO_-_Extruder_-_Bowden_4010_Radial_Fan_Duct.stl
304 Ko · 5 595 descargas
-
stlHEVO_-_Extruder_-_Direct_Drive_-_E3D_v6_with_5015_Radial_Fan_for_v1v2.stl
361 Ko · 5 620 descargas
-
stlHEVO_-_Extruder_-_Direct_Drive_Bondtech_Mirror_Aero_v3_with_BL_Touch.stl
198 Ko · 5 620 descargas
-
stlHEVO_-_Extruder_-_Bowden_v6_Mod_4010_Radial_Fan_V2.stl
239 Ko · 5 607 descargas
-
stlBed_Bracket_20_1.0.stl
247 Ko · 5 552 descargas
-
stlBed_Bracket_25_1.0.stl
96 Ko · 5 557 descargas
-
stlBed_Bracket_40_1.0.stl
208 Ko · 5 559 descargas
-
stlBed_Bracket_15_1.0.stl
248 Ko · 5 549 descargas
-
stlBelt_Tensioner_v3.stl
49 Ko · 5 593 descargas
-
stlBed_Bracket_30_1.0.stl
219 Ko · 5 557 descargas
-
stlBed_Bracket_45_1.0.stl
201 Ko · 5 543 descargas
-
stlBelt_Clamp_v3.stl
132 Ko · 5 595 descargas
-
stlHEVO_-_Extruder_-_Bowden_Fan_Duct.stl
1.2 Mo · 5 543 descargas
-
stlHEVO_-_Extruder_-_Bowden_Mount_v3_STD_BL_Touch_for_Side.stl
1.5 Mo · 5 580 descargas
-
stlHEVO_-_Extruder_-_Bowden_Mount_v6_STD_BLTOUCH_in_Rear.stl
1.6 Mo · 5 580 descargas
-
stlX_Carriage_HCEvo_V2.2_LM10.stl
3.2 Mo · 5 629 descargas
-
stlHEVO_-_Nedalive_-_Rear_BL_Touch_Mount.stl
75 Ko · 5 596 descargas
-
stl60mm_Fan_Clip_for_MKS_Gen_L_Bracket_v2.stl
27 Ko · 5 563 descargas
-
stlHEVO_-_MKS_Gen-L_Bracket_Straight.stl
57 Ko · 5 567 descargas
-
stl3030_IEC_AC_Plug_Snap_On_Cover.stl
67 Ko · 5 569 descargas
-
stlHEVO_-_MKS_Mosfet_Single_Bracket.stl
128 Ko · 5 562 descargas
-
stlHEVO_-_X_Flag_extension.stl
35 Ko · 5 558 descargas
-
stlHEVO_-_10mm_Y_Stop_Flag_v2.stl
48 Ko · 5 565 descargas
-
stlHEVO_-_Y_stop_optical_sensor_holder.stl
117 Ko · 5 553 descargas
-
stlHEVO_-_Z_Carriage_-_Ultra_Short_for_IGUS_RJMP.stl
172 Ko · 5 566 descargas
-
stlRight_idler_mount_+corner_bracket.stl
394 Ko · 5 541 descargas
-
stlLeft_stepper_motor_holder+corner_bracket.stl
732 Ko · 5 557 descargas
-
stlRight_stepper_motor_holder+corner_bracket.stl
778 Ko · 5 541 descargas
-
stlLeft_idler_mount_+corner_bracket.stl
478 Ko · 5 544 descargas
-
stlHEVO_-_Z_Carriage_Bearing_LM12UU.stl
2.1 Mo · 5 564 descargas
-
stlHEVO_-_Beefed_up_Motor_Plate_L+R_Corners_v2.stl
130 Ko · 5 526 descargas
-
stlHEVO_-_Beefup_Motor_Plate_v2.stl
55 Ko · 5 529 descargas
-
stlHEVO_-_Extruder_-_Direct_Drive_Bondtech_Mirror_Aero_v3.1_with_BL_Touch.stl
188 Ko · 5 528 descargas
-
stlHEVO_-_Beefed_up_Motor_Plate_L+R_Corners_v3.stl
124 Ko · 5 502 descargas
-
stlHEVO_-_E3D_v6_with_5015_Radial_Fan_WITH_DC42_IR_PROBE_AND_BL_TOUCH_LH.stl
391 Ko · 5 493 descargas
-
stlHEVO_-_E3D_v6_with_5015_Radial_Fan_WITH_DC42_IR_PROBE_AND_BL_TOUCH_RH.stl
365 Ko · 5 494 descargas
-
stlHEVO_-_Direct_Drive_-_Generic_Extruder_24mm_Motor.stl
130 Ko · 5 485 descargas
-
stlHEVO_-_Direct_Drive_-_Generic_Extruder_36mm_Motor.stl
130 Ko · 5 482 descargas
-
stlHEVO_-_E3D_volcano_FANDUCT_with_5015_Radial_Fan_WITH_DC42_IR_PROBE_AND_BL_TOUCH.stl
34 Ko · 5 473 descargas
-
stlHEVO_-_E3D_volcano_with_5015_Radial_Fan_WITH_BL_TOUCH_LH.stl
247 Ko · 5 472 descargas
-
stlHEVO_-_E3D_volcano_with_5015_Radial_Fan_WITH_BL_TOUCH_RH.stl
234 Ko · 5 471 descargas
-
stlHEVO_-_E3D_volcano_FANDUCT_with_5015_Radial_Fan_WITH_BL_TOUCH_v2.stl
35 Ko · 5 465 descargas
-
stlHEVO_-_Beefup_Motor_Plate_v3_Mini.stl
36 Ko · 5 457 descargas
-
stlHEVO_-_Z_Carriage_Bearing_LM12LUU.stl
204 Ko · 5 475 descargas
-
stlHEVO_-_Z_Motor_Mount_-_v3.1_Mini.stl
83 Ko · 5 464 descargas
Descrição
This is the built that I used for my 2 builds of HEVO which are remixed from many sources.
It has everything from boards, gantries, brackets and everything for your conveniences.
it has mounts for both Direct and Bowden as well! (Mounts based on Nedalive X standard carriage)
X&Y Gantries: 10mm Rods - Using IGUS RJMP
10mm Rod: Carbon Solid Rods for X / Steel on Y
Z Gantry: 12mm Rods - Using IGUS RJMP (Also version with LM12UU)
12mm Rod: Steel
Direct Drive - it is currently designed for Bondtech - Just mirror it for Titan v6/Aero
BL Touch is available for v3 Direct Drive Mount or via Nedalive's rear BLtouch Mount
For Bowden - there is Nedalive's bowden mount - I used rear mount when I was on Bowden
There is a version of the bed Motor T8 brackets that can be used for DuetWifi Auto Bed Leveling for either 3 or 4 Lead Screws!
Wanted to thank Tech2C, Scott3D, Nedalive, Tunnelvision and many others to make this possible!
(If you see something that I can add the remix by, please tell me.. I forgot as there are so many of you that inspired and helped me! Thank you!)
Next version - beginning to study MGN Rails
Update: 2018/5/4 - updated HEVO - Extruder - Direct Drive (Bondtech) (Mirror Aero) v3.1 with BL Touch - Cleaned it up a lil and strength the part
Update: 2018/5/9 - updated HEVO - Beefed up Motor Plate (L+R Corners) v3 - it should work with regular bed setup with brackets
Update: 2018/5/10 - updated:
1) HEVO - Direct Drive - Generic Extruder - this direct drive should fit most 35mm and under motors (prefer 22mm pancake+10mm heat sink) - This should work for Titan+V6 / Titan Aero / Bondtech+V6
2) HEVO - E3D v6 with 5015 Radial Fan WITH BL TOUCH - updated V6 hot end with 5015 Radial Fan with BL Touch (add 2mm spacer on top of the mount and BL Touch - approx 8mm clearance)
(Left Hand and Right-Hand version - updated)
a) Made 2 version: 24mm Motor (Pancake) and 36mm Motor (can use Pancake+Heatsink)
Update 2018/5/11 - Updated the Fan mount and fan duct to be used with Volcano Hot End
Update: 2018/5/12 - Updated Fan duct for volcano short 5015 fan
Update: 2018/5/16 - Updated HEVO - Beefup Motor Plate v3 Mini for smaller builds (200mm)
Update 2018/5/20 - Updated the HEVO - Z Motor Mount - v3.1 Mini - for smaller builds (200mm) - can be used for all sizes