Pi TFT plus Console Case
par arcmatt
Fichiers imprimables (12)
-
stlPiBoxTFTTop.stl
155 Ko · 23 674 téléchargements
-
stlPiBoxTFTBaseFanFrame.stl
441 Ko · 23 388 téléchargements
-
stlPiBoxTFTBaseEnclosedFanDrill.stl
203 Ko · 23 334 téléchargements
-
stlPiBoxTFTBaseFanEnclosed.stl
232 Ko · 23 369 téléchargements
-
stlPiBoxTFTBaseFrame.stl
319 Ko · 23 320 téléchargements
-
stlPiBoxTFTPiBox.stl
337 Ko · 23 357 téléchargements
-
stlPiBoxTFTPiBoxPlugFriendly.stl
337 Ko · 23 350 téléchargements
-
stepPiBoxTFT45BaseFanFrameMod.stp
160 Ko · 23 087 téléchargements
-
step
PiBoxTFT45TopDropHex.stp
60 Ko · 23 090 téléchargements
-
step
PiBoxTFTPiChannelModThinPlugRev.stp
315 Ko · 23 043 téléchargements
-
stlPiBoxTFT45BaseBlower2.stl
441 Ko · 23 023 téléchargements
-
step
PiBoxTFT45BaseBlower2.stp
172 Ko · 22 951 téléchargements
Description
The AstroBox Touch has got me excited: Kickstarter or AstroPrint
So I made a case for a Raspberry Pi (3) and an Adafruit 3.5" TFT in a console style.
The Console consists of 3 parts: The Base, The Body and the Top or screen bezel. I used embedded nuts to bolt the parts together and for mounting the Raspberry Pi. The voids for the nuts are in the STL files, simply pause at the layer height and place the nuts then resume printing.
There are choices for the Base, some are enclosed and some an open frame. Both have options for a 40mm fan. The fan mounts below the Raspberry Pi, but there is an air duct that directs air flow over the top of the Pi as well.
The Body and Top should be rotated 45º to sit flat on your print bed. The BaseFanFrame should also be rotated to sit flat on the print bed for best results on the fan mounting surface.
After building your enclosure, follow this tutorial at Adafruit Learn to get it up and running.
When asked "Select project" choose option #2 and "Configure options manually".
Enjoy !
UPDATED
10/18/2017 Added: Revised PiBox, I made the wall with the power plug opening thinner to allow plug to seat better. Title: PiBoxTFTPiBoxPlugFriendly.stl
Added: I converted my SolidEdge part source files for those who would like to modify the parts into STEP (.stp) files which can be opened in a variety of software packages including AutoDesk's FREE Fusion 360.
11/14/2017 Added a Base for a 50mm blower fan with 20x15mm outlet. MUCH better airflow.