TeaBot automatic Tea Maker / Tea Timer REmixed
par dustinbrun
Fichiers imprimables (8)
-
stlTeaBot_Base_with_cutouts-Base001.stl
534 Ko · 17 téléchargements
-
stlTeaBot_Base_with_cutouts-Deckel001.stl
281 Ko · 14 téléchargements
-
stlTeaBot_Bottom_Part.stl
1.4 Mo · 15 téléchargements
-
stlTeaBot_kinematic_arm_high.stl
3.6 Mo · 15 téléchargements
-
stlTeaBot_kinematic_arm_low.stl
4.1 Mo · 15 téléchargements
-
stlTeaBot_Top.stl
5.7 Mo · 15 téléchargements
-
stlTeaBot_Arm_LH.stl
1.4 Mo · 15 téléchargements
-
stlTeaBot_Arm_RH.stl
1.3 Mo · 15 téléchargements
Description
The design uses the 3D model created by SnakeP (licensed under Creative Commons - Attribution, see link below). I adapted the TeaBot_Base to be able to fit the electronics inside it. This eliminates the need for a separate electronics enclosure. The parts TeaBot_Arm_LH and TeaBot_Arm_RH need to be printed two times each.
I removed the battery from the device, it is powered directly from the USB Type-C connector.
All other Project resources (Schematic, Arduino Code) can be found on Github: https://github.com/dustinbrun/TeaBot