Parametric drill stop
von ksuszka
Druckbare Dateien (24)
-
stldrill_stop_metric_set.stl
4.2 Mo · 4 382 Downloads
-
stldrill_stop_imperial_set.stl
3.9 Mo · 4 265 Downloads
-
stldrill_stop_metric_3.stl
361 Ko · 4 268 Downloads
-
stldrill_stop_metric_3.5.stl
449 Ko · 4 236 Downloads
-
stldrill_stop_metric_4.stl
245 Ko · 4 258 Downloads
-
stldrill_stop_metric_4.5.stl
331 Ko · 4 208 Downloads
-
stldrill_stop_metric_5.stl
321 Ko · 4 287 Downloads
-
stldrill_stop_metric_6.stl
399 Ko · 4 300 Downloads
-
stldrill_stop_metric_7.stl
263 Ko · 4 227 Downloads
-
stldrill_stop_metric_8.stl
468 Ko · 4 299 Downloads
-
stldrill_stop_metric_9.stl
407 Ko · 4 210 Downloads
-
stldrill_stop_metric_10.stl
435 Ko · 4 261 Downloads
-
stldrill_stop_metric_11.stl
297 Ko · 4 207 Downloads
-
stldrill_stop_metric_12.stl
358 Ko · 4 217 Downloads
-
stldrill_stop_imperial_1_8.stl
425 Ko · 4 198 Downloads
-
stldrill_stop_imperial_5_32.stl
497 Ko · 4 187 Downloads
-
stldrill_stop_imperial_3_16.stl
524 Ko · 4 196 Downloads
-
stldrill_stop_imperial_7_32.stl
434 Ko · 4 190 Downloads
-
stldrill_stop_imperial_1_4.stl
282 Ko · 4 193 Downloads
-
stldrill_stop_imperial_5_16.stl
506 Ko · 4 191 Downloads
-
stldrill_stop_imperial_3_8.stl
566 Ko · 4 196 Downloads
-
stldrill_stop_imperial_7_16.stl
435 Ko · 4 170 Downloads
-
stldrill_stop_imperial_1_2.stl
346 Ko · 4 197 Downloads
-
stldrill_stop_imperial_9_16.stl
162 Ko · 2 785 Downloads
Beschreibung
I don't like drill stop designs where a screw touches the drill, as they tend to skew on the drill, especially on drills with thin blades, like wood drills. With this design, the whole inner surface of the drill stop holds the drill.
To assembly it, you need an M3 washer, M3 nut and M3 screw, 12mm length (it may be a little bit shorter for smaller drill diameters). The nut should be a very tight fit to prevent turning.
A tip for an easy insertion of the nut:
- insert a long M3 screw (at least 20mm) through the screw hole
- put the nut on this screw and screw it till the nut is in the position
- gently unscrew the long screw leaving the nut in the place
- put the washer and the final screw